![]() |
phosban reactor?
just got the reactor and im not sure what i need for a pump. also im kinda wondering what people use for media.
|
I have a 2 little fishies reactor and I use an MJ400 as the feed pump...even then, I have to keep the JG valve partially closed in order to not have too much flow. As for media, I started using Seachem, but moved over to the High Capacity media from Bulk Reef Supply...very good stuff...and it doesn't take much. Plus now you don't pay duty from them on any order so you are getting a really good deal from them.
|
Quote:
|
I use seachem matrix carbon and rowaphos in my reactor. for a power head I'm using an aquaclear 20 and I have to dial it down a bit to keep the media in there.
|
Seachem matrix and |Rowa here too. I have the reactor plumbed off my return pump, so no extra pump needed.
|
I run a small maxijet (I don't know which one), and use a John Guest valve on the output side to control the flow through the reactor. It worked great when I used it, but no longer have need for a phosban reactor so its offline.
|
MJ 400 and Rowaphos
|
i use kent carbon and zeovit zeolites with a mj400. every couple of days, i disconnect the zeolites and shake them up to remove the mulm.
|
would activated carbon and chemi pure be alright to mix with the rowa phos?
|
bump
|
All times are GMT. The time now is 01:15 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.