bah why not
 

well last weekend (while I could still breath with out it hurting :rolleyes: ) I got off my duff and put this togeather

http://members.shaw.ca/s.l.s/temppics/kalkreactor3.jpg

and 5 min after installed

http://members.shaw.ca/s.l.s/temppics/kalkreactor4.jpg

I only screwed up onece which resulted in me breaking the bottom off and making it 3.5" shorter :) I am still going to put another stage on it to perfect the design as a part of it is working but not as good as I had hoped. Anyone have any 4" tube laying around?

Steve

So is it a skimmer, reactor or just a thing that makes bubbles :lol:

Oh ya, it is a kalk reactor, no bubbles :lol:

Steve

Very cool steve!
How are you supplying a feed to the reactor?

Steve how much 4" tube do you need?? Is extruded okay?

How did you cut the flange and cap, I've tried using my router but I find I still get really rough edges.

not sure, looking for about a foot of 4" i guess. I made templates for making flanges on a laith and then used a plotting program on a miller to make the holes. I simpily tape plastic to the template and put it on my router table, the drill out the holes.

Steve

I've got a peice that is about 11 inches long I can give to BC Grl if I can set that up. Let me know if that works for you.

:eek: :mrgreen:

naa going to end up to short, thanks anyways though :biggrin:

Steve

What do you pay for it over there if it is any cheaper we can get you a 6 ft length for $51