Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   uh oh (http://www.canreef.com/vbulletin/showthread.php?t=41869)

tgoeujon 05-04-2008 07:21 PM

uh oh
 
i managed to kill off every fish in my tank in 3 hours and not damage any inverts or coral. i dont understand what happened all of my testing shows normal. the only recent change was i added 2 koralia 2 powerheads to my tank to replace the powersweep p.o.s i had running. too much flow wouldnt kill fish that quick would it. on the plus side i have a reason to get the 110 up and running quicker.

Zoaelite 05-04-2008 08:07 PM

hMM
 
Need a little more info to diagnose your problem, how many fish, how big is the tank, how long has it been up for, how deep is your sand bed, any large water changes , what do you dose with, when you say normal perameters what do you mean, what are your Nitrates, Nitrites, NH3, Phosphate, pH, Temp, Salinity...
Levi

tgoeujon 05-04-2008 09:57 PM

the tank is a 55 gallon, been up and running for approx. a year and a half. sand bed is 4" deep. i change 10 gallons every 2 weeks ( instant ocean). i dose with iodine, coral accel, strontium and molybdenum, purple up, liquid reactor, i stick to dosing instructions on the bottles. i lost a regal tang, yellow tang, 6 line wrasse, 2 chromis, blue devil, yellow damsel, domino damsel, saddled toby puffer, diadiem dottyback, black percula and salarias blenny. parameters are salinity 1.023, ammonia 0, nitrites 0, nitrates 5, ph 8.2, temp 80

banditpowdercoat 05-04-2008 10:00 PM

Whoaa dude, killed all livestock??? Dayum. Hope you find the cause, I havnt gto any ideas

Come to think, you added 2 powerheads. Wonder if there was anything on them? Oil or plastic mold release residue? Params seem ok. 4 year old tank so pretty stable I presume

Sure you want more Zoo's right now?

tgoeujon 05-04-2008 10:04 PM

i cleaned the koralias pretty well first. i just dont understand what would kill the fish and not even phase the corals or inverts. definately want the zoos

justinl 05-04-2008 10:28 PM

Quote:

Originally Posted by tgoeujon (Post 322273)
the tank is a 55 gallon, been up and running for approx. a year and a half. sand bed is 4" deep. i change 10 gallons every 2 weeks ( instant ocean). i dose with iodine, coral accel, strontium and molybdenum, purple up, liquid reactor, i stick to dosing instructions on the bottles. i lost a regal tang, yellow tang, 6 line wrasse, 2 chromis, blue devil, yellow damsel, domino damsel, saddled toby puffer, diadiem dottyback, black percula and salarias blenny. parameters are salinity 1.023, ammonia 0, nitrites 0, nitrates 5, ph 8.2, temp 80

well personally i think it was overstocked, but that probably wasn't the reason. at least not directly. Did you notice any parasites or disease symptoms? overstocking stress might have made them more vulnerable to a fast acting pathogen of some sort.

do you test for what you dose (and my, what a list you have there) or just follow directions on the bottle? what do you test your salinity with? hydrometer? refractometer?

Der_Iron_Chef 05-04-2008 10:29 PM

What inverts do you have?

Jason McK 05-04-2008 10:43 PM

Really Zero Nitrates with all that fish.
Have you ever tested your tank for the levels of the addatives you are adding? Most of them contain trace elements of something else you where adding. I would imagine your trace elements are over the safe levels.

Sorry to hear your losses


J

24storm 05-04-2008 10:46 PM

With a 4" sand bed and adding the power heads how much did you disturb the sand. When did you do your testing? before the lose or after? If it was before how long before you added the new power heads? My guess is you release a lot of stuff in the sand bed.

Keith

Reefhawk1 05-04-2008 11:07 PM

Is it possible you had a nitrate spike? you have a reading of 5 is this normal for your tank?

When you changed your power heads did the flow increase disturb the sand bed?


All times are GMT. The time now is 12:23 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.