Which Eheim return pump???
 

Hi All,

I'll be picking up a submersible return pump very soon. I have decided i'll get the best and spend some extra $$$ and pick up an Eheim. My new setup is a 50G display and a 15G sump. I was thinking the Eheim 1250 (~200 gph) would do the trick. Is this enough flow through the sump? Or would the Eheim 1260 (~500 gph) be a better purchase? I don't need the pump to add flow in the display tank as I have powerheads doing this already. Your thoughts? Thanks for your help! :)

Bud

Id go with the 1250, because TOO much flow can be a bad thing..

We have 1250's in both our 50 and 65 gallon tanks and find they have more than enough flow. Its also a very quiet reliable pump IMO.

Not to sidetrack the post, but it doesnt make sense that almost everyone with an Eheim says they are great, and the 1250 @ just over $100 is not outrageous, how come a majority of people use every other kind? Availability maybe? I am sold on the Eheim, and plan on using one on my new 60G.

Well, I thought about going with a Mag pump, but for the extra $30, I think the reliability and peace of mind is worth it!

In any case, it sounds like the 1250 might be a go??? That would be roughly 3x turnover. And what about that? Some people say 2x turnover is sufficient and some say 10x!!! I'm confused! :p

I am in the same boat as you, 60G in progress, and lots of different comments on how much flow from the return pump. I agree that for the little bit of extra $ it is worth it!

Anybody else with some thoughts???

The numbers come from what are you trying to do. Low end is if sump just feeding a skimmer (logic being more than skimmer is rated is probably wasted flow) or on the high end if combining a refugium or using the return pump to provide flow for display.


I'm using my return to up the turnover of my BB in addition to a CL plus have a cheato refugium in my sump. Just using the sump tank size for the ratio I'm pushing about 13X/hour through it. Found with another pump 26x was too much as was getting micro bubbles in display and detritus wasn't settling out.

And if you go to Wetwebmedia, Fenner's a big Eheim promoter.

price at the time. The mag 700 is generally half the price of the eheim 1260. I have no complaints about the mag pump either. I wish I could afford to buy higher quality for every component but it's not feasable for some people.

now as for "enough flow through the sump" the less flow you have the fewer microbubbles and less evaporation. that's from my own experience. the sump doesn't need to have crazy flow rates like your tank does. a lower flow rate just means longer dwell time, which means the water going back to the tank will be "cleaner" from the skimmer etc etc.

Sean - I did not intend to sound like a snob. In the grand scheme of things, what is $30-$50 extra on a pump, in comparison to what we spend on LR, livestock, and even skimmers? For myself being fairly new, it is good to hear everyone's view on what they are using and why!

:biggrin:

I didn't read your post as snobbish. I read it as curious. No worries dude :)