75 gallon in the works
 

I've been working on setting up a 75 gallon tank for the last year and a half and I'm finally making some progress. Lots of do it your self projects.

I'm a steel fabricator during the day so naturally I had to make my stand from steel

http://www.canreef.com/photopost/dat...382_-_Copy.JPG

Maybe I got a bit carried away when I decided to wet sand with 1k grit paper, then polish the paint to a mirror finish

http://www.canreef.com/photopost/dat...390_-_Copy.JPG

I found some nice shiny black panels and etched glass doors at the Ikea as is section one day

http://www.canreef.com/photopost/dat...402_-_Copy.JPG

And today I decided to try out my diamond hole saw from Hong Kong

Before

http://www.canreef.com/photopost/dat...415_-_Copy.JPG

Less than one minute to drill each hole

After

http://www.canreef.com/photopost/dat...445_-_Copy.JPG

I seem to have more time than money to put into this project, but the incidentals I always end up buying for these DIY projects always make me wonder if I'm actually saving any money.

Next up will be building an over flow box, then plumbing.

Thanks for looking, Myles