![]() |
Share Your Random Tips
Just like it says. I'll start, and I have lots of these but nothing's really coming to mind.
Today I realized I could make water changes a lot easier on me and my reef inhabitants by simply moving my top-off pump from fresh water to my saltwater reservoir. Then I could remove water by siphon and it would slowly refill with fresh saltwater. |
If you have a mag-float type algea scraper,try to get in the habit of cleaning the glass every day or 2 ,and you wont have to break out the blade scraper on the weekend for the built up coralline.
|
Quote:
Here's one of my own: A 6g glass jug (for winemaking), a cheap air pump, and an electronic timer equals a quite safe and very cheap auto top-off unit. |
Quote:
ANd do you set the timer for how long, 30 minutes or so? |
Quote:
|
for the beginners:
-when selecting LR, choose pieces that are porous and have a lot of holes. not only is it cheaper, but a porous piece provides more surface area for biological activity. -when designing a system, don't forget flow. it's almost as important as light. and with the new affordable flow pumps on the market, there's no excuse for lack of it. |
For a cheap but effective source of Blue light, try Ikea's LED strip lights. 4 strips in a box for $40. You can also connect them together to make 1 big strip. I do this for my 10gallon nano, and my friend does this on his 90gallon tank and it looks beautiful.
|
There`s a bunch of good idea`s in this thread aswell,
Its 7 yrs old....but there`s a few that some may use anyways. http://216.187.96.54/vbulletin/showt...ht=tips+tricks |
Quote:
|
When making water for your water changes adjust the chemical balance before adding it to the tank. I struggled for months with low calcium and magnesium levels in my tank. I tested my makeup water one day and realized that my calcium and magnesium were too low, thus I was actually depleting the levels in my tank each week with my water changes. Once I started adding calcium and magnesium to my makeup water my tank levels were rock solid. I was even able to remove my kalk reactor all together.
|
All times are GMT. The time now is 01:26 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.