![]() |
Remra HOB skimmer and micro bubbles
Anyone have experience with an Aqua C Remora protien skimmer? I have had it running for 3 weeks now and it is still producing lots of micro bubbles. Any experience with the preskimmer box that you can get for this skimmer? I have herd from some that it does not make a difference. Any input is welcomed.
Thanks, Ted. |
Quote:
No experience with the preskmimer box... |
I eliminated the micro bubbles with a $2 home made bubbles trap.
|
Quote:
|
Yes, please describe. Is this a DIY and if so could you explain... picture perhaps?
Ted. |
3 Attachment(s)
1. small container and suckers from Dollars Store
2. cut or drill holes at the bottom of the container. Holes shouldn’t be too big or the filter media will fall off the bottom due to the weight of the water 3. drill 3 holes at the side of the container for the suckers 4. cut a piece of fine filter media and put it in the container 5. mount it just below the water exit of the skimmer Filter media: http://www.jlaquatics.com/phpstore/s...t_ID=cl-fmedia BTW: How do you guys cut and paste picture onto the post ? |
Another option (for the even lazier) is get a piece of filter foam a little wider than the outflow lip. Cut a slit down the middle of the foam and slip it over the lip.
Presto! No more bubbles. I use bulk black foam so it's less noticeable. I rotate 3 pieces every half week or so to prevent nitrate buildup. |
Sweet, thanks guys. I will give the foam trick a try!
Ted. |
All times are GMT. The time now is 01:21 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.