Skimmer/Calcium Rx Kit - Flanges for 4"/6" tubing
 

I am selling the following items labelled A, C, D, F, H, I, in the picture with 16 nylon thumb screws and butane O-rings as a kit.
http://www.canreef.com/photopost/dat...103_0339AA.JPG

These kits are CNC machined out of 1/4" cast acrylic (not extruded) so the holes all line up perfectly. And don't forget the kit includes the orings and nylon screws!!!

I'm selling the kits for $70 - thats basically my cost for the acrylic and labour at the CNC Machining shop.

A DIY junkie should know what these are for and what one can make with them. Its basically all the parts for a beckett skimmer and you just have to build a box around part A and add the length of 6" and 4" tubes.
However one can also make Kalk reactor and a calcium reactor with these kits just as easy - you just wouldn't use the parts for the 4" tubing.
Parts B.E. and G are extras but added to the picture to show you what it would look like if you were to join A to I from the bottom to the top.

I also have 6" OD acrylic tubing for sale http://www.canreef.com/vbulletin/showthread.php?t=27617

PM if interested.

bump
 

bump