Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- DIY (http://www.canreef.com/vbulletin/forumdisplay.php?f=13)

- - 4" hole saw (http://www.canreef.com/vbulletin/showthread.php?t=25541)

Chin_Lee

06-21-2006 02:55 AM

4" hole saw

does anybody have a 4" OD hole saw that I can borrow to drill through wood? please PM me if you are willing. Thanks

Delphinus

06-21-2006 03:18 AM

I would (lend you one) if I had one... sorry!

But, in the event you can't find one, I took a CD, traced it out and then used a jigsaw. A bit slower but if you're steady you can make it a perfect looking circle. I've done several fan holes this way. HTH

Midknight

06-21-2006 04:24 AM

I might have one laying around will have to check.

Chin_Lee

06-21-2006 05:05 AM

thanks

Tony
good advice. will keep that in mind.

Midknight - let me know if you do. Thanks

Denis

06-21-2006 05:06 AM

Biggest I got is 3.5".

TheReefGeek

06-21-2006 04:04 PM

The 4" are a stupid price aren't they!

jimmyray

06-21-2006 05:18 PM

Hole saw

I have one Jim 604 -830-5573

Midknight

06-21-2006 06:07 PM

We don't have the hole saw but we do have a jig. Hooks up to your jigsaw and you can set to what ever size hole you need. PM me if you want to give that a try. :wink:

GMGQ	06-21-2006 07:50 PM

I use a dremel with the hole cutting attachment. VERY handy for cutting larger holes, and not that expensive.

All times are GMT. The time now is 06:54 AM.