Kalk reactors
 

Anyone seen any good kalk reactor plans around for DIY? I would be interested in seeing them if you have!!!!

thanks much!!!

Here are a few good sites. The problem you are going to have is cost for acrylic or Clear PVC. From what I understand, if you use PVC parts, 4" acrylic will not work, and you will need to size up to 4 1/2". The problem with sizing up is you can't buy extruded 4.5". 4" extruded runs about 12 bucks a foot. 4 inch cast runs about 50 bucks a foot. You can buy clear PVC for 35 bucks a foot, but you will not be able to find anyone that will sell less than 10' sections.

http://www.geocities.com/Heartland/V...nk/nilsen.html

http://www.geocities.com/Heartland/V...nk/nilsen.html

http://www.mv.com/users/besposito/nilsen.html

http://themantledmonster.thereeftank.com/diy.html


Good Luck. Let me know if you fins any other good sites, as I plan on building one in the next while.

Cheers,

Al