FS: Dual Stage Controller, Chiller/Heater
 

Brand new, in box direct from aqua logic, was a waranty replacement that is no longer needed....

The microprocessor-based electronic temperature controller is designed to provide on/off control for commercial heating and cooling applications. It is equipped with a Liquid Crystal Display (LCD) that provides a constant readout of the sensed temperature and a touch keypad that allows the user to easily and accurately select the setpoing temperature, differential and heating/cooling modes of operation. The NEMA Type 4X controls have enclosures rated watertight for outdoor use.

• For use with chillers up to 1/2 hp and heaters up to 1000 watts
• Simple keypad programming of setpoint temperature, differential and cooling/heating modes.
• LCD readout of sensor temperature, control settings, relay status and onboard diagnostics.
• Wide setpoint temperature range (-30°F to 220°F) and differential adjustment (1°F to 30°F).
• User selectable Fahrenheit/Celsius scales.
• Lockout switch to prevent tampering by unauthorized personnel.
• NEMA Type 4X enclosure rated watertight for outdoor use.
• Watertight Titanium Encapsulated Thermistor.


A Dual Stage will control both a heater and chiller at the same time.

Way, Way, Way, below cost!!!! $150

Wow, now that is tempting. Gotta pic?

http://www.aqualogicinc.com/manualfaq/tr115mandual.htm

more info on controller

Otherwise known as the dual stage Ranco controller..

yup, thats one of the other stickers you would find on the front of one of these...

SOLD