![]() |
Frustrations with Vertex Omega 150 Skimmer
anyone else running this skimmer at 9-3/4" water depth is close with problems? I have the riser tube open 100% I also have the adjustable nozzle (where the water comes in) turned out almost all the way
this thing is skimming wet, not very dark. When I pulled my filter socks and put new ones in, this went crazy and just overflowed the collection cup like no tomorrow. one other concern I always had... the skimmer doesn't' really seem to sit level - the pump weight tilts it a tad bit, and the weight of the cup usually brings it to plumb. I could be paranoid, and granted with all the problems I've had with this thing I should be - but shouldn't it be plumb? |
Quote:
|
Have my 150 set at 7.5 inches , works great the smell makes me want to puke when I take the lid off the cup to empty/clean lol. I would raise the skimmer and try that .
|
Was running mine at 8.5" and not too happy with production. After some reading on different forums decided to raid it up an inch. So far much better. Still find it very finicky, if you feed or put hand in tank, foam collapses right away.
|
hello.
i have mine in 8 inches of water and is perfect. are all your filter socks new? new filter socks always cause skimmers to overflow like crazy for days and days in my experience. if you are using new filter socks for the first time i recommend vinegar soak and a major rinse first. i am guessing that thia ia your problem |
yes tht is too deep
|
Thanks for the info guys. Have the 150 as well at nine inches of water and could only get tea coloured skim mate except around the throat and lid. I have raised it up to 7.5 inches water depth and we will see how that works.
Thanks again. |
Omega 150
Quote:
|
I have the Omega 150 and love it. How long have you been running it? It will flow wet until it breaks in. And yes, agree with the filter socks... will overflow like crazy if you don't rinse first.
|
I've been using this for 1.5 years off and on between moves
|
All times are GMT. The time now is 03:20 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.