Doser 2 Pre Orders are Starting
 

After the massively successful launch of the NEW GHL Doser-2 at Macna Last weekend we can now announce the pre order schedule.

But first a key reminder of the features that made the Doser one of the star attractions to the show!

NO other doser can match the doser in terms of performance functionality and price!

Key features
• Built in Wifi
• IOS - Android - MY GHL cloud and direct software enabled.
• Available in 3 or 4 pump units (3 pump can be upgraded to 4 pump later on)
• Total of 16 pumps in one chain
• Stepper motor driven
• ALL German parts
• Doses down to 0.1ML
• Interactive control will monitor your container levels and warn you when one is running low
• Pharm grade dosing tubing allowing the dosing of Iodine and other strong chemicals
• Level ports for Auto top off and Auto water changes
• Temperature port for monitoring chilled coral fine foods.
• PAB (ProfiLux address Bus) enabled allowing for expansive future add on accessories
• 4 x 24vDC inputs for GHL’s dedicated stirrers.
• 2 year warranty an all parts other than service items such as peri tubing and pumps.

Full details here
https://aquariumcomputer.com/en-GB/products/ghl-doser-2

Pre Orders start 15th September.

3 channel doser = $499.00 (CAD)
4 channel doser = $599.00 (CAD)

We have a significant dealer base so please email us info@ghlna.com for the closest dealer to you.


https://aquariumcomputer.com/images/...nglisch(1).png

Its all in the review!
 

You know a product is good when it gets the Reef-builders treatment

http://reefbuilders.com/2014/09/03/c...2-dosing-pump/

I'm guessing the original doser isn't compatible with the doser 2, yes no?

No it is not 100% different product.

So could I have the profilux continue running the doser and then have the new system running independently or do they occupy the same software section in the system?

Hi

You can run the old doser as before but i suggest updating the ProfiLux software and firmware which incorporates many of the new doser features.

You can then purchase the new doser slave model out soon and connect that via PAB port to your ProfiLux then you can access both through the same software.

Dealer packs now available

email info@ghlna.com if you have not received yours.