Radions Damaged?
 

Some of you might already know I had a leaky sump last night that flooded my living room. During this incident, my power packs for my Radions where also wet. This morning when I tried to plug them back it kept tripping the breaker. Im assuming the power pack still has water inside? What do you guys think? Im thinking the power packs are toast and a replacement is required. The LED fixture should be fine im my opinion . Such a bad timing for things to go bad :(

put the upside down and let them dry out for a day or 2 and retry them

Finger Crossed

ive seen alot of them get wet and after sitting for a couple days (with a fan pointed at them) they always seemed to work afterwards

rinse in ro/di then dry

dont do this, if you want to rinse it use rubbing alcohol, the ro/di water can damage the circuits were the rubbing alcohol acts as a good cleaner and wont damage anything, it will also remove the water and evaporate quickly

Should I take it apart and wipe it down?

the main goal of cleaning it out if you do is to remove any salt as it will corrode the circuits, it never hurts, i use qtips and alcohol for cleaning circuits or cotton ball thingies

Yes alcohol will clean it properly but there will be some moister in some of the electronic parts, I would alse Place the wet power supply in a bag with some or lots of salt as it removes all moisture from any electronics and will render it workable again...good luck

+1

Use something that dries fast like rubbing alcohol or electronics cleaner and a can of compressed air