![]() |
Salt Water Storage
Im currently storing pre mixed salt water in a brute food grade container and when I went for water today and removed the lid I was overwhelmed with a musky odour. Looking in the container you can see what appears to be black algae, it is all throughout the container both above and below the water level. Is the water still safe to use and how does one prevent this from occurring?
|
I would not risk putting it in my tank.
|
Was the salt Salinity or Fluval as fluval did that to a friend of mine
|
Black algae sounds nasty, I wouldn't risk using it. I store my salt water in a plastic container as well & have never had this issue. I have a small power head running to keep it well mixed & prevent stagnation until I'm ready to use it. Usually don't make up fresh water until a week or less before a water change.
Are you using tap water to make your fresh salt water? If so, there could be sufficient organic material in your mix resulting in stuff 'growing' in there, especially if stored for a long time & stagnant. |
Ya I'm not going to take any risk. Once the waters gone I'll clean the container and everything that was in it with bleach. As I don't know if its black algae or if it could be mold.
|
It is RODI water mixed with fluval salt. It has been left stagnant in the container.
|
I would throw a powerhead in it or at least a pump and airstone.
|
Yeah fresh water is usually fine to leave standing for a while but salt I always run a powerhead. Even in my ato res I run a powerhead just to be safe.
|
Quote:
|
bleach would be best, let the container dry for at least 24 hours after
|
All times are GMT. The time now is 01:48 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.