![]() |
Tap Water Purifier Life in Vancouver
Curious as to what life expectancy in gallons users of the Tap Water Purifier achieve using Vancouver water.
|
Tap Water Purifier Life in Vancouver
I live in Richmond. I've made up over 50G using the TWP and the cartridge is about 1/3 spent.
|
Tap Water Purifier Life in Vancouver
Hi,
I am currently running DI on my water at about 150 - 180 gallons per cartridge. But, I have noticed that the carbon needs replacement (or supplement) in about 50G. - Victor. |
Tap Water Purifier Life in Vancouver
I heard somewhere about buying the chemicals to recharge the units at home with out having to buy a new cartridge.. Any info??
|
Tap Water Purifier Life in Vancouver
Quote:
Steve |
Tap Water Purifier Life in Vancouver
Not too expensive, but it takes about an hour the first time to figure out what you're doing. If anyone wants the instructions, they can be found here:
http://www.reefs.org/library/article/twp_recharge.html **Remember, if you do this, these chemicals are very corrosive. Use appropriate safety equipment in a well ventilated area. |
Tap Water Purifier Life in Vancouver
We are talking about major toxic wastes to get clean water.. I love my TWP but if this is what is takes.. There must be a better way..
:confused: |
Tap Water Purifier Life in Vancouver
Quote:
robert [ 25 August 2002, 22:49: Message edited by: Robert ] |
Tap Water Purifier Life in Vancouver
Quote:
|
Tap Water Purifier Life in Vancouver
I can do that.. Made some nitro in my senior project.. still here.. Noxious yes but I have to try it..
|
Tap Water Purifier Life in Vancouver
Hmmm...
Looking at the cost of using DI I am thinking of switching to RO. A 5 stage unit sells for about $350 which is just about the least expensive I've seen. As with recharging the DI resins....where does all the corrosive stuff go? Just disappears down the drain. Out of sight...out of mind. This is okay if you live in an area where there is waste water management but if you don't please mind what you pour down the sink. clint |
Tap Water Purifier Life in Vancouver
Hi,
The two (very) active ingredients are HCL and NaOH. These two solutions are in very high concentrations and they are very corrosive individually. However, if you carefully (slowly) mix the two chemicals together, HCL + NaOH <=> NaCl + H2O NaCl...or table salt (without the iodine), is corrosive too....especially to steel and stainless steel, but it it is relatively harmless in diluted form. Of course, this is assuming that there is equal amount of HCL and NaOH in the two solutions. If either solution is greater, then the unreacted portion of the solution will enter the water system. So, it is relatively safe...other than concentrating all of the metals, phophates and silicate from 150 gallons in to 1 gallon of waste water. - Victor. |
All times are GMT. The time now is 03:40 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.