Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   who's running the vortex mp10 (http://www.canreef.com/vbulletin/showthread.php?t=94426)

donkey77 02-06-2013 07:52 PM

who's running the vortex mp10
 
who's running the vortex mp10, just picked one up, i can get a nice wave going but just wondering what others are set at
thanks

reefwars 02-06-2013 08:00 PM

Quote:

Originally Posted by donkey77 (Post 790628)
who's running the vortex mp10, just picked one up, i can get a nice wave going but just wondering what others are set at
thanks



it will depend on what your trying to achieve , theres different settings for different results.

for me i run one on pulse and one on reefcrest , i use the mp10 on pulse and the mp40 on reefcrest.

75g cube.

Tn23 02-06-2013 08:04 PM

I have 2 mp10wes and I run mine on the purple or yellow modes.
Would like to know what everyone else uses as well!

Proteus 02-06-2013 08:09 PM

i use one on my lil cube its on reef crest at 80%.

getting a wave going is cool until it ends up on floor

donkey77 02-06-2013 08:24 PM

thats funny it just happened deadly little powerhead

ScubaSteve 02-06-2013 08:52 PM

I run mine on lagoon at 100%

Salt2Death 02-06-2013 09:02 PM

Any one get them to work on 1/2 glass??


Sent Via The Pirate Ship...

Plainswalker 02-06-2013 09:04 PM

Running an MP10 on my 35g on 80% reefcrest.

ScubaSteve 02-06-2013 09:06 PM

Quote:

Originally Posted by Salt2Death (Post 790653)
Any one get them to work on 1/2 glass??


Sent Via The Pirate Ship...

Don't work. I wanted to put mine on my back glass but totals 1/2" (actually a little bit less) because there is a cosmetic black acrylic sheet over the back glass. Don't hold. I have to stick it on my side glass.

Duker 02-06-2013 09:50 PM

I run two along with my mp40 at 80% on reef crest (yellow), one mp10 at 80% on reef crest (yellow)and the second mp10 at 80%on nutrient uptake (purple). :biggrin:

mikepclo 02-06-2013 11:13 PM

This??? :mrgreen:

http://www.youtube.com/watch?v=1vkGaGgUmnU

viperfish 02-06-2013 11:19 PM

Reef crest at 80% for me. I just wish it wasn't so damn loud!

madchild 02-07-2013 12:00 AM

I have one running reef crest at 100% along with 2 Koralia 1050's.

blacknife 02-07-2013 12:59 AM

Had 2 on my 55 <36x18x21> thought there was lots of flow till I bought a mp40 to hold while replacing a dunked control. mp40 is a little strong for the some of my corals to be right in front of but an inch or 2 out of the stream is ok. mp10 left mp10 back mp 40 right. 10's at 100% 40 at 80ish. I switch between tidal swell and nutrient uptake once every while.

to bad the 10s wont fit on the next build 2 new 40s is going to add to the cost :(

happy with them other than that.

NIVLEM09 02-07-2013 12:59 AM

I have one mp10w es and is on short pulse mode,running at 50% to minimize the noise,supplemented with two koralia 750.

Rogue951 02-07-2013 01:16 AM

I have 2 on opposing sides of a 40 breeder and use Reef crest and Nutrient transport modes.

ChizerBunoi 02-07-2013 02:31 AM

I have four MP10s running, two on each side. Two opposing sides are running reef crest on anti-synch. Other two are on tidal or nutrient uptake.

kies1 02-11-2013 01:04 AM

Running 3 100 percent on reef crest mode. One on back glass and two on either end of the tank


All times are GMT. The time now is 03:49 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.