What would you do?
 

I have at my disposal a custom made plexi tank
that measures 96"L x 8"Wx 12"H.

What would you do with such a tank?

I think small triggers might be fun, but it's
not a very wide tank and triggers grow.

Looking for ideas.

What would you do?
 

That's a tough one, but I'd probably turn it into a fresh water river system and have all the water flow one way.

What would you do?
 

That is the weirdest shaped tank I have ever heard of.. Are you sure those measurements are right? heheh

What would you do?
 

Is see your dilemma. 8 feet long by 8 inches? Wow, that's next to useless. A river system would be neat but realistically what fish are going to be happy in 8" except for some really small fish, and for those isn't 8 feet long a bit overkill.

Hmmm.... scrap acrylic? Just kidding ... wait maybe not really.

I don't know. It's certainly no tank I'd use, that's for sure.

What would you do?
 

you could use it for a eco-system behind the tank

Steve

What would you do?
 

DSB :D

What would you do?
 

Fuge. One or two 4' GE Ultra Daylights would be all you'd need. They run about $4 at Canadian Tire. Set it up to be slightly elevated behind your main system. Fed with a maxijet from your main tank. Drill a hole for a 1" drain just below the lip of the tank on one face. Have this return back to your main system.

Toss Calerupa in it a good sand bed and critters and you are set.

What would you do?
 

Darren, that could get a bit ackward. That tank is over 300 pounds. Finding/making a stand might be a problem.

What would you do?
 

Cinder blocks and plywood....

oh, and styrofoam of course.. :D

[ 24 July 2002, 19:20: Message edited by: EmilyB ]

What would you do?
 

Personally I would cut it up.. there's really not much you can do with a tank that shape.. You could build a lot of skimmer with that much acrylic.

What would you do?
 

I am sure of the measurements [img]smile.gif[/img] It was a custom
tank that a fellow had as a brackish tank in his
office at work. Was quite nice when all set up.
It's quite thick plexi and very well done.
It would be a shame to cut it up. I'd far rather
sell it to someone who could find a use for it.

I had contemplated a refugium. Other than that
I'm sort of stumped :>

What would you do?
 

Hi,

That tank would make a nice display tank that was built inside a wall -- you could even place such that you can see both sides of it. Putting surge tanks on either end of the tank would make an interesting display as the wave passes through.

Given its height, it would be pretty easy to light up with some VHOs or PCs.

I guess...its like a 10 gallon tank that is 8 feet wide (instead of 20 inches)...a wide nano tank. If done properly, it would make a very interesting and unique display tank. You would need a sizeable sump/refugium since you won't have much of a sandbed with 12 inches of height or room for skimmers and such.

- Victor.

What would you do?
 

I think it would make an awsome fresh water tank with plants, or you make it salt but only put in very small fish and some shrimp.

Cheers,
Patrick