Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Buy/Sell/Trade (Aquatics hardware related only) (http://www.canreef.com/vbulletin/forumdisplay.php?f=31)
-   -   Return water pump 1600 + gph (http://www.canreef.com/vbulletin/showthread.php?t=88833)

Midway 08-14-2012 07:39 PM

Return water pump 1600 + gph
 
Hi there,

I'm looking for a fairly strong pump. 1600 + gph

Let me know if you have one of these you want part out with.

Thanks.

FishyFishy! 08-14-2012 07:42 PM

Are you looking for an internal or external pump?

Midway 08-14-2012 08:06 PM

Sorry I forgot to mention this. Internal or external any will do. Do you have any of these pumps there FishyFishy?

FishyFishy! 08-14-2012 09:07 PM

I may have a Reeflo Snapper Hybrid, But i'm not 100% yet. I'll let you know ASAP if I need to upgrade (might be changing my sump room to basement, so I need higher head GPH).

daplatapus 08-14-2012 11:47 PM

Are you needing any head pressure? I also may have a Reeflo pump coming up.

Midway 08-15-2012 03:44 PM

Exaclt that's what I'm lookiung for, sorry I'm not very specific in my post here. what I need is a high head pump. what you got there daplatapus?

daplatapus 08-15-2012 11:16 PM

I've got the Reeflo Dart. at 10' of head it's still at 1850 gph. But I just got it with this used 210 gallon I bought so I haven't tried it yet. I've already got a hammerhead so unless I keep it as a spare... I haven't had a whole lot of time to think about it yet.

What kind of head are you up against?

Midway 08-15-2012 11:43 PM

Around the same as you, about 10' to 12'

Midway 08-16-2012 06:06 PM

Any yet????? I will have to order a new one if no one has one out there.

reefwars 08-16-2012 06:09 PM

hey manny, have you tried dave at concept im sure he could help you out:) cheers buddy!

Midway 08-16-2012 06:29 PM

Forgot about good Dave, I will give him shout for sure. Thanks there Danny!!

TimT 08-16-2012 07:22 PM

I have a slightly used(1 month) Iron Might external pump. 16' cut off and at 5.5' of head it does 1800gph. It draws 1.8 amps at full load and is 1.5" inlet and outlet. It runs at 1725rpm so is very quiet. American made pump and motor. Has a 1 year warranty and I will sell it for 220. Quick disconnects are $15 a set for the pump.

Cheers,
Tim

Midway 08-17-2012 02:40 PM

Found a pump here in Calgary guys, thanks for your interest.


All times are GMT. The time now is 04:46 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.