![]() |
what is your tap water pH
hey everyone,
i tested my tank water at 8.6 {still cycling} and then tested my tap water at 7.6.....and that got me thinking, is my test kit off? just wondering what everyone else here is reading on their water right out of the tap and if you want even your tank pH?. thanks |
6.9 out of the tap and 8.24 in the tank
|
Mine reads 7.61, my TDS is @ 180ppm, pure water is 7 ph.
|
no idea, pH isn't something I measure.
|
sorry guys i should have specified that i meant people in edmonton.....i wanna see the validity of my test kit:wink:
|
Quote:
REALLY?!?! why not? this has got me super curious |
Quote:
why measure for something that fluctuates and changes with the seasons and days. i have no idea what my ph is and i prob never will lol:P |
7.4 ish I think.
Tank is between 8.1-8.2 usually. |
Quote:
I used to test years ago, and found my pH really low. Drove me nuts for months. Then I realized the only critter stressed was me. I threw my probe out and haven't had a pH problem since. It's not really a critical parameter. Using water and salt, your pH will be in a range acceptable to your tank. Whether it's 7.9 or 8.5 doesn't matter at all. The worst thing to do is muck around with it trying to change the number, and that can cause instability. Just leave it where it wants to be and toss the pH test kit :) |
More than you ever wanted to know about pH.
A Simplified Guide to the Relationship Between Calcium, Alkalinity, Magnesium and pH http://reefkeeping.com/issues/2006-06/rhf/index.php#10 Low pH: Causes and Cures http://reefkeeping.com/issues/2004-09/rhf/index.htm High pH: Causes and Cures http://reefkeeping.com/issues/2005-03/rhf/index.htm |
thanks guys....honestly i have been stressing like crazy because i was worried that my tank would be uninhabitable and that i would end up with a steamy boal of fish soup because of the pH and now knowing "seasoned" experts dont even give a flying **** about pH im less stressed lol.
thanks again you guys were a lot of help and also thanks for the links.....a bit too in depth for my taste but still very nice |
lol you need to relax and put the test kits down.. I only test calcium and alkalinity. unless something seems odd (by sight) that's it. I have no idea what my ph in my tank is but it's 6.5 in my calcium reactor rofl
|
hahahah lol fine fine, i am now putting down the test kits. what is alkilinity? what does it do lol? and i have a calcium test but im not touching it until i actually have anything in the water and on top of that whatever is in the water it better depend on calcium loool
|
calcium will naturally buffer pH into the accepted range
|
Quote:
|
When I lived in Edmonton my tap water was hard and pH 7.8. Wasn't keeping salties at the time by my Malawi cichlids loved it.
Re the test kit readings. I did an experiment once with a "colour match" pH test kit where I performed the test twice and noted the same reading. I then took two newly calibrated pH probes and tested the same water. The readings from the probes were 0.5 points lower than what I saw in the test kit (i.e. 7.9 vs 8.4). This was several years back and I don't remember the brand of the test kit. However the lesson I took away from this was that test kits have their place in indicating "swings" in the parameter that your testing (pH, NO3 etc.) but the actual result should not be considered absolute. I am therefore a +1 with everyone who stated that if it's consistant (even if you think it's high) don't mess with it. |
Quote:
Chemistry and the Aquarium: What is Alkalinity? By Randy Holmes-Farley http://www.advancedaquarist.com/2002/2/chemistry |
7.3 out of the tap. But 8.4 in tank. I quit checking tank since I found I was getting foul reading from halide lights. Strange as it sounds. My reading differs from tank to sump
|
Quote:
|
I'm in north Edmonton and mine tested at 7.4
|
Quote:
|
All times are GMT. The time now is 06:21 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.