LF: Brute gargage can dolly with castors.
 

let me know if you have one, or if you know where to get them.
thanks!
http://www.homedepot.com/catalog/pro...a5ff65_400.jpg

Believe Home Hardware Sells them.

Home Depot should have them too.

Actually that is what I ment to say.

Chris

Got mine from Home Depot, they were $50. Worth every penny :biggrin:

hrmmm...
they dont seem to be listed on the homedepot.ca website...
and i didnt see them at my local HD.
i guess not all stores carry them.
i will keep looking then!
thanks!

I saw them at the Home Depot on terminal about 2 months ago.

Don't know what size you need, but would one of these work?
Princess Auto Barrel Dolly. Argh, I can't get a link to work from their search site. Go to Princess Auto and search 'barrel dolly'. They have 3 available for less than the $50 quoted. What's strange is the larger one is cheaper. I have the 23" one and it works quite well. Just had to lube the wheels a bit.

Canadian tire sells them. That's where I got mine six months ago

The one in burnaby, behind lougheed hwy had them a few months ago, when I was last there.

Walmart has them here...but I am on the other side of the world!

Any Acklands Grainger will be able to order it in for you.

wow! so they're basically everywhere except for the places i've been to!
thanks for all the suggestions!

I have one you can have for $20.00

Not too hard to DIY something like this. Heavy duty castors, a sheet of plywood, a few nuts & bolts. Maybe not as pretty as the bought ones, but it will do the same job. Most hardware outlets will carry a variety of castors.

good idea, will end up costing more in the long run as a small heavy duty caster is 10 buck, the size I would use is 20 bucks. (bigger wheels make it easier to push around on the carpet)

Steve

Princess auto, Kelowna has used casters

Cut a piece of 3/4"-1" plywood into a circle that match the diameter of the base on your brute, then raise the center with another piece and throw some wheels on it.