Surplus equipment
 

TheBoss(tm) gave a directive... Clean the clutter!

Calgary area, but I don't mind to ship.
--

Mag-Drive Model 18 $80

400w pulse-start MH ballast (ANSI M135/M155, if I recall correctly) $50

DIY Zeovit/similar reactor. Should be able to do at least 2l of zeolites. Can be fed by a Maxijet powerhead. $20
http://i305.photobucket.com/albums/n...s/IMG_3336.jpg


Precision Marine Bullet-1 skimmer, waste collector, 1-1/4" gate valve, and Mag 18 pump. I ran this on a 90g and a 115g reef and for the size rating it's possibly the most effective skimmer I've ever ran. $150 Sold

Sunlight Supply "Reef Optix 2" (http://www.jlaquatics.com/phpstore/s..._ID=sl-mhropt2) parabolic/"batwing" style halide reflectors with sockets.. up to 4 available. 3 are brand new and never used. The 4th comes in a DIY pendent. $10 each. Take all 4 for $30. Sold

Tunze 6212 wavebox with controller and mounting magnet (for glass to 1/2"). $150 Sold

Tunze 6100 (older style controllable stream). I can probably set you up with some "Algae Free" mounting magnets with this. $80 Sold

Red Sea Wavemaker Pro - powerhead controller (http://www.marinedepot.com/wavemaker...er_pro-ap.html). $40 Sold

Ecosystem Aquarium filter sock holder. Clamps on side of sump. $20 Sold


..

I may have more to add to this as I sort through things.

BOOO. And me being broke as a joke... Such wonderful equipment at such wonderful prices as always.

I'll take the little giant pump if it not gone already.

PM sent
VR

Bump - list updated, items added.

Bump - still some items available here.

Bumpity!

that mag 18 Tony how old is it i might take that brother

I'm not sure its exact age .. it's a couple years for sure but should still have lots of life left. I'll see if I can guess a year on it by the serial # and can post back. I'll try to snap a picture of it too maybe.

Hey Tony have you sold the filter sock holder yet?

Nope, it's still available!

Any chance you could measure it for me so I know if it will fit in my office tank sump?

Ok, measured: It is 11" wide and about 9" tall on the height dimension, but bear in mind that it is meant to wrap around the side wall of the sump and you tighten the screw to hold it in place, so the top sits more or less flush with the top of the sump. The bulkhead is for 1.5" threaded PVC. It is slip on the inside of the bulkhead if you want a shunt in there (i.e. in case you're doing Herbie overflow and want the water draining under the water surface).

Thats perfect it will fit, I will take it. Planning on coming down tomorrow, can you take it to work with you and I will come pick it up? Send me a PM with your work address and a contact # please.

still have the mag 18?

Yes, still available. :) (Sorry for the slow reply..)

Bump - pump still available, zeovit reactor still available, added a 400w MH ballast.

Bump

Would you do 70 shipped for the mag to ontario? PM me for details if you need them.