hardware clearout
 

Ok so my plans have once again changed and some of the stuff I have I can't use. So time to get rid of stuff so I can figure out what I realy need.

here is what I have found so far.

I will concider reasonable offers, and if some one wants to buy most of the stuff to continue with what I was planning I am sure we could work a package deal.

updated below


Steve

Also have my old stand that I will let go for $150.00
it cost 250 in metal plust a bunch of wood to build, but I have no real use for it anymore. If no one wants it I will cut it apart and use it for the base of my welding table.

the tank you see in there is 24 wide, 24 tall and 36 long. the inside of the stand its self is 54" long so if you put a 4 foot tank in there you would have 6" left at one end to hid plumbing.. but you would need new doors for that.

http://www.members.shaw.ca/crystalk/tankdoor.jpg

http://www.members.shaw.ca/crystalk/tankdooroff.jpg

Steve

I also have a tone of PVC fittings. plastic gate valves, ect. let me know what you looking for and i'll see what I have

Steve

What was the deal with the "Tunze nano" did you get that figured out?

2" PVC gate valve?

I'll go look in a few min. just finnished supper

Steve

I didn't see one there, 1.5" but I have a nother place to look so tomorrow morning I'll check there.

Steve

pmed for skimmer

what is the flow on the 6060 tunze

6060 is 1585 gph.

Steve

figured out!

Steve

sweet, I'll take it if you'll ship :)

ok, lowered the prices on the Mak4's and the UV.

Steve

ya, I was going to shy away from shipping but what the heck.. PM me and we can work it all out.

Steve

updated. more comming

Is the UV 25 watt or 40 watt?

I think its the 25, but I will double check in the morning.

Steve

ok sorry for taking so long to find out. had to do some work on my Bar and lost track of time :mrgreen:

anyways it is the 25 watt version.

Steve

updated

updated

pics and a couple new things.

Steve

Just though I should add a comment on the RO system. the reason for the higher price if people are wondering is the pump its self is a 400.00 set up new. so in reality you are buying a used pump and getting the RO for free :mrgreen:

Steve

updated

updated list

Two 30 gal tanks, one notched for external over flow, the other to be used as the sump. Have the glass to make the external overflow also; bottom piece is drilled for 3 bulkheads for a herbie overflow. Overflow notch needs to be smoothed out yet. $100.00 for all

GenX Mak4 pump $80.00


http://www.members.shaw.ca/s.l.s/fishsale/mak4.jpg




New things.

Mazzei injector upgrade for beckett. original a 75.00 injector, I let it go for 25.00 and if you want the fittings and such you see in the picture just let me know.

http://www.members.shaw.ca/s.l.s/fishsale/mazzei.jpg


and this one was a tough desision. was going to keep it but decided for the amount of use I would give it now some one with a large fishtank would be much better served.

RO set up, this set up is a two membrain set up, which I was running 160GPD membrains for a total of 320 GPD. it includes a 10X4" pre-filter for sediment with a graduated 25 to 1micron filter included. two pre stages for carbon block, two membrain holders, and one post stage for DI. Also includes an industrial presure pump with adjustable regulator. I had no problem getting 120PSI through this system starting with a 40 PSI house PSI. you will need to buy new membrains of your choice, two carbon block filters and what ever you want to run for DI. I will let this go for 250.00 as the pump set up cost 400 alone

http://www.members.shaw.ca/s.l.s/fishsale/rosetup.jpg



*** new found things***

I found two SE 400 watt MH bulbs lower usage but can't remember what kind they are Ushio 10K comes to mind. 20.00 each

I have one 14K SA 250 watt SE bulb, only fired for break in and PAR readings, Very high PAR out put bulb. 35.00

two SE 250 watt bulbs I believer they are 10K's and if there SA they probably have about 3 or 4 months use on them but I can't see a marking on them.. anyone local running 250 watt SE bulbs I could try these in the fixture to see which bulbs they are. anyways if you want bulbs to play with 15.00 each as it sits when I find out what they are I will price them different.


Steve