Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   Lumenarc 3 mini's. (http://www.canreef.com/vbulletin/showthread.php?t=44615)

JDigital 08-30-2008 06:26 PM

Lumenarc 3 mini's.
 
I am looking at the Lumenarc III Mini reflectors (14.5"Lx14.5"W) for my new lighting on my 75G tank (48"Lx18"W)... would 2 reflectors provide adequate coverage over the length of my tank, or should I look at getting 3?

seanoman 08-30-2008 06:38 PM

I have 3 on my 220 which is 6 feet long and they work great. Two should be lots of light for a 4 foot tank. Also with it only being 18 " deep you can have them higher off the tank so the light spreads wider.

Oceanic 08-30-2008 07:04 PM

My tank runs two of these exact units! My tank is also 48" long. works great!

JDigital 08-30-2008 07:13 PM

Quote:

Originally Posted by Oceanic (Post 342754)
My tank runs two of these exact units! My tank is also 48" long. works great!

Perfect news to my ears! Thanks:mrgreen:

How high off the water are your units?

Oceanic 08-30-2008 09:31 PM

Quote:

Originally Posted by JDigital (Post 342757)
Perfect news to my ears! Thanks:mrgreen:

How high off the water are your units?

I keep my lights pretty low at about 6" off the top of the water, I don't like to much light spillage into the rest of the room.


I am very happy with the results.

jpdutton 08-31-2008 02:18 AM

Yeah two of these on a 75 will cover everybit of the tank, I had two on my 4x2x2 120g about 9" above the waterline and it covered everywhere. I now have one over my 75g 24x30x24 and still get great coverage.

JDigital 08-31-2008 05:31 AM

Great... Thanks for the feedback guys!!

Jason McK 08-31-2008 06:46 AM

Rule of thumb is 2 square feet per reflector so your covered

J

wayner 09-03-2008 02:04 PM

Are the lumenarc mini's easy enough to mount to the top of a canopy?

Tks

Delphinus 09-03-2008 06:32 PM

Yes - there is a screw hole right in the centre that you just put a screw through to the surface you're mounting onto.

wayner 09-03-2008 07:48 PM

Thank you, even I can do that :biggrin:

Doug 09-03-2008 07:55 PM

2 Attachment(s)
Attachment 3183

Attachment 3184

wayner 09-03-2008 09:29 PM

Thanks Doug, the pictures tell the whole story.:smile:

Chad 09-03-2008 09:32 PM

I wish I could even find these.

wayner 09-03-2008 10:05 PM

Here's a store that I've ordered from before.

http://www.reefexotics.com/lumenarc.htm

Doug 09-04-2008 01:36 AM

Quote:

Originally Posted by wayner (Post 343413)
Thanks Doug, the pictures tell the whole story.:smile:


You're welcome. Wish I could see the pics though. :lol: Dont know what I did to my computer but an upcoming format will fix it. :lol:

I purchased mine in Winnipeg. I thought someone mentioned JL was stocking them now but not sure??

JDigital 09-04-2008 04:14 AM

Thanks for the pics Doug... gives me a way better look at them compared to the website.. :mrgreen:


All times are GMT. The time now is 05:33 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.