Separating mixed bed Di resins
 

This article describes separation and recharging.

http://www.reefs.org/library/article..._instruct.html

Separating mixed bed Di resins
 

Thanks!! Brad

Separating mixed bed Di resins
 

You're welcome. When the document says do this in a well ventilated area, it mean it. Other than that, it's fairly simple to do.

Separating mixed bed Di resins
 

Hey Brad,

The chemicals needed for the recharge process, are they readily available?Where do I get them?
Have you ever done a recharge? I read the article and found the separation of the resins rather confusing. Any suggestions??

Thanks!!!

Separating mixed bed Di resins
 

Danny, the chemicals are available easily. It looks like I gave you a link to the long article. Here is one for an edited version.
http://www.reefs.org/library/article/twp_recharge.html

Lye can be found at Safeway or Save On Foods. Muriatic acid is from Crappy Tire.

Separating mixed bed Di resins
 

Thanks Brad!

I came across this US company Spectra Pure They sell bulk DI resins in both mixed as well as separated forms. I am going to see whether they will ship to Canada. Besides resins, they also sell complete water purification systems. Check it out!!

Separating mixed bed Di resins
 

Ya, but I like messin' with chemicals. And it costs me about $2 to recharge 3 TWP cases.

Separating mixed bed Di resins
 

Brad,

I just got a used TWP from Christy. Once I have enough spent cartridges, I plan to separate the resins,"lol" I planned to take several emptied cartridges and modify them into a 3 column TWP (carbon,cation,anion). Is this possible or do I have buy 2 additional base units. My plan is to fill 1 cartridge, fill with carbon and install it to the base unit. Take 2 emptied ones , cap them at each end and install i/p and o/p fittings , fill 1 with cation the other with anion and run them daisey chain to the o/p of the base unit "carbon". Will this work? Any suggestions? Thanks!

Separating mixed bed Di resins
 

Danny, having separate chambers is actually better than mixing them. Mixed beds can neutralize each other at the point of contact. All you need is to insert some compression fittings thru the screw-on caps and daisy chain them. Works really well.

Separating mixed bed Di resins
 

Hi,

Does anyone know of links to instructions for separating resins from a mixed bed DI cartridge??

Thanks!!!

Separating mixed bed Di resins
 

Thanks Brad,

If I can get some separate resins from Spectra Pure , even better. If the cost is about the same as buying a couple new Twp MB cartridges, it will save me the time from having to separate them myself. I'll just take a couple of sections of pvc pipe and fabricate some cylinders for the different resins. Thanks for you advice!!!

Separating mixed bed Di resins
 

original post

<font size="2" face="Verdana, Helvetica, sans-serif">Hey Brad, under what section would I find the Lye at safeway or save on foods???

Separating mixed bed Di resins
 

original post

quote:
--------------------------------------------------------------------------------
"Lye can be found at Safeway or Save On Foods. Muriatic acid is from Crappy Tire"
--------------------------------------------------------------------------------

Hey Brad, under what section would I find the Lye at safeway or save on foods???

Separating mixed bed Di resins
 

It's either in the cleaning or laundry section. I'll post the brand name for you tonight.

Separating mixed bed Di resins
 

Hi Brad,

Did you manage to get the brand name of the lye I should buy for recharging?? Thanks!!!

Separating mixed bed Di resins
 

Sorry, fell asleep and forgot. Now that I'm actually looking for it, I can't find the container. Maybe 'cause I just moved. I'll check tomorrow when I get dinner. Until then, it's in a small white plastic container with red writing on it.

Separating mixed bed Di resins
 

Thank you!!!!!