Final stand design
 

Ok final plans (I think [img]images/smiles/icon_biggrin.gif[/img] ) after a couple days of thought and a few ideas I came up with this for a stand..
http://members.shaw.ca/stircrazy/standcovered.jpg

I am going to use it to devide my front room off from the front entry, so the short side will be against the wall and the main tank will be viewable from 3 sides.

Steve

[ 20 January 2002: Message edited by: StirCrazy ]</p>

Final stand design
 

Very interesting. There was someone with a very similiar design about six months ago. I'll try to remember who it was as it would be interesting to see how his/her project came along.

Final stand design
 

The stand was Flame Angel on Reef Central.

Scott

Final stand design
 

As well I had my design online that was similar to that Troy.

For my 120 that is..

Shaw lost it tho when I moved. So I have to re do it..

Final stand design
 

StirCrazy,

With so many tanks aren’t you worried about hoses slipping and pumping copious amount of water through out your house?

I really like the design and I have been working on a bigger tank design for my house in 2 years but I am worried about hoses and connectors. I prefer not to have basement swimming pool.

Thanks
Patrick

Final stand design
 

Hi,

Hoses slipping...use stainless hose clamps [img]images/smiles/icon_smile.gif[/img]

- Victor.

Final stand design
 

well I plan on using as little hose as I can. I am going to hard plum as much as I can.. and anywhere there there is a hose will have a hose clamp. there are so many tanks as I want a sump, a quarenteen tank, and a refuge. oh and also I forgot to draw the top off water tank on the top level [img]images/smiles/icon_biggrin.gif[/img]

Steve

Final stand design
 

Use Quick disconnect unions..

And I'd go as much hose as you can.. Too much hard stuff can lead to a lot of work if something breaks or needs to be moved..

as well with hoses you get less vibrations being passed through everything.

Final stand design
 

hmm ok.. what kinda hose Darren?

Steve

Final stand design
 

Steve, use the braided type clear plastic hose. They have it at HD. I use it all over my system, from 1/2" up to 1 1/4". I think I got some for a better price at Coast Industrial on Dupplin Rd. same stuff tho. [img]images/smiles/icon_wink.gif[/img]

Bruce

Final stand design
 

ok so should I just use 2 x 1" bulkheads then? is that enuf for a 90 gal tank?
I am asking cuz if you can only get that flex like up to 1 1/4 then 1 1/2 is to big...

Steve

[ 18 December 2001: Message edited by: StirCrazy ]

Final stand design
 

I used a 1" bulkhead on the overflow for my 15g but I don't know how much they can actually flow. Might want to go bigger, maybe 1 1/2 or more. If you are using two tho, maybe if both were 1 1/4 or 1 1/2 that would be fine... anyone else?

Final stand design
 

They have 1 1/2" at HD, got some when I was building my system. But I had piped averything in the end. And liek Darren said, you will have vibrations transmitted to everything. I will now be breaking into my straight sections and installing hose to reduce vibrations.

Lee

Final stand design
 

hey Lee, do you have any pics of your plumming on yours?

Steve

Final stand design
 

steve
this amounts to a fairly heavy system over a small footprint. is it going to be on a basement or main level slab or is it on the second level or apptment? shane

Final stand design
 

well it has started. I did have to modify it a little.. I basicly made it 4.5' long and 25" wide and took off the top level. I will figure out a different way to mount the refuge.
http://members.shaw.ca/stircrazy/welding.jpg
http://members.shaw.ca/stircrazy/standstart.jpg

the two main frames also have a cross brace which wasen't in yet when I took the pics.

Shane, sorry for the long time befor a reply I was in edmonton and coulden't log in, but ya my house has no basement and I am on a concreat slab so weight is not a concern.

Steve

[ 01 January 2002: Message edited by: StirCrazy ]

Final stand design
 

can one of the mods move this to the DIY forum please..

Steve

Final stand design
 

well thinks are starting to happen, I ordered my 90 gal tank (36l x 25w x 24h) yesterday and bought a titanium heater. today I finnished welding my stand and bought the paint for it. (start painting tomorrow) I also bought 280lbs of dolomite for my sand bed, another 3 bulb ballast so I can over drive my actinics, and the last set of water proof endcaps I need. I am going to snap a couple more pics tomorrow of the stand as it sits so far.

Steve

[ 03 January 2002: Message edited by: StirCrazy ]

Final stand design
 

Hey Steve,

what ballasts are you gonna use to overdrive your actinics? Are you using 3 lamps? VHO lamps or NO lamps?

I want to run 3 VHO or overdriven 36" actinic on my tank.

Thanks,
oh ya, what kind of endcaps are you using? [img]images/smiles/icon_biggrin.gif[/img]

Final stand design
 

I am over driving three 36" philips actinic/03 bulbs

I bought the coralife encaps (24.00 a pair)
they have something like a 8 foot cord atached to them also and hangers.

Steve

Final stand design
 

Thanks Steve,

I looked back to your overdriving lights thread and saw that you are using GE electronic rapid start ballasts. Would the workhorse ballasts be any better or no difference?

any opinions?

Final stand design
 

well I am thinking the workhorse might overdrive NO bulbs like a ice cap but I am not sure.. I might go tomorrow after lunch and check them out..

Steve

Final stand design
 

Well the stand is comming togeather now. I got it put togeather and painted today.
http://members.shaw.ca/stircrazy/standwelded.jpg

http://members.shaw.ca/stircrazy/painted.jpg

Steve

[ 04 January 2002: Message edited by: StirCrazy ]

Final stand design
 

Ok due to a earthquake I had to cut my stand apart and rebuild it [img]images/smiles/icon_rolleyes.gif[/img]
after I finnished painting it I noticed it didn't look right and when i checked it the top was out from the bottom by more than 1.5" [img]images/smiles/icon_sad.gif[/img] so after several bad words [img]images/smiles/icon_eek.gif[/img] and hours of fighting with a grinder [img]images/smiles/icon_mad.gif[/img] it was all apart and I rebuilt it using new legs. so now it looks like the pictures again [img]images/smiles/icon_razz.gif[/img]

Steve

Final stand design
 

Ok after 6 hours of cutting and screwing I have the wood frame atached to my stand.
http://members.shaw.ca/stircrazy/woodon.jpg
http://members.shaw.ca/stircrazy/woodon1.jpg

thats all for a couple days I think.. well maby not [img]images/smiles/icon_biggrin.gif[/img]

Steve

Final stand design
 

Ok I bought some trim and put one of the pannels on to see what it would look like. well here it is so far.
http://members.shaw.ca/stircrazy/dooron.jpg

Steve

Final stand design
 

Wow... that's looking pretty nice Steve. Love to see it when its all done. It's going to be a great focal point for that room.

Final stand design
 

well its been a while and a lot of painting but I finaly have the frame all done. it is 3 coats of spar polyurathaine on the inside and 3 coats of water based polyurathaine on the outside. so now I have to try to get the tank back in the stand (anyone feal like doing somelifting [img]images/smiles/icon_biggrin.gif[/img] ) and start hanging all the doors.
http://members.shaw.ca/stircrazy/wholeframe.jpg

Steve

Final stand design
 

Ok and here is what it is looking like with the tank in and some of the doors on.
http://members.shaw.ca/stircrazy/somedoorson.jpg

Steve