broke it!!
 

dropped the lid on my euroreef 180...it now needs some gluing...any ideas what will hold it??

Crazy glue

If it's acrylic, Weldon 16 will do the trick

yuppers weld 16 is the trick put it on the inner seam and clamp toether and you wont hardy see it ...

A month or so ago I had the same problem with a Euroreef 180. I used Weldon to but my collection cup back together.

Nothing against Weld On 16 but it's fairly thick and a bit slow to cure. Good gap filling qualities. If you need very close tolerances then go with Weld On 4 which is like water and cures quite quickly or go with #3 which cures very quick.
All will do the trick.

Weldon 4 is great if you can reassemble the pieces and then just wick in the glue with a needle and squeeze bottle.

There is a glue product out there that is called Gorilla glue. It is a polyurethane glue, the piece's to be glued have to be wet down, apply glue and clamp. best on the market I have used it on a odd ball fitting for my whole house RO system.

Good glue but the Polyurethane expands a lot. Has to be clamped very tightly.

This is true but worth it if it can be done/