T5 bulb to augment LEDs
 

Hi
I am looking for recommendations for the best (your preferred) T5 bulb to augment full spectrum LEDs. I am adding four 2' T5s to my current 3 GHL mitras in an effort to address some of the shadowing and spotlighting. All of the bulbs will need to be the same as I am placing them between the pendants and at each end.
Cheers
VR

Exact same situation I was in. I added 4 x 48" T5's. I run superblues and it works out well.

Blue plus and coral plus.

Sorry, if I was doing just one I would probably do coral plus and set the LED's on the blue side.

I went coral plus and actinic on mine, seems to be working out well would be interested to know how the coral and blue plus combo works

I would use Coral Plus since it is a more balanced spectrum than your LEDs. Then you can tweak the Mitras on the blue side to get the look you want.

I really like the 50/50 mix of blue plus with coral plus for colouring and growing Acropora.

Thanks for the advice!! Because of how I'm going to mount them I will need to use all the same bulbs. Think I will follow Mykas recommendation I can always add more blue and drop the green warm white down/off if it's too green or yellow

Please let us know how it goes in the next 4-8 weeks. :)

Agree with the other users that if you are only using 24w,
you want to maximize the light output which a whiter bulb can be more effective than the blue plus. It should definitely fill in the shading, from my understanding and most of the reefers on here would agree the blue LEDs bleach Lps corals lesss than the white LEDs. Most times when you turn the whites to maximum you will bleach corals unless you have a deeper tank with lower scape and wider lens. Blue LEDs run at max won't do this.

I feel like it's better the other way around.

Use leds to supplement t5s.

Get the spectrum of t5s but the pop of led...

As long as heat isn't a concern, t5 is way more tested and true.