please contact Aqua Digital for a original fuse from GHL

Thanks

Is there any reason I couldn't just go to an electronics store like radio shack or something and get an 8 amp fuse from them?

Hi,

you can do this if you want. But: Please make sure that it's exactly the same type (8A, 125V, time-lag, UL/UR or CSA certificated!).
And we made once the experience that there are fuses available which become very hot. Our fuses are high quality fuses and have a minimum power dissipation.

If technical datas are ok and the fuse doesn't become too hot -> go to an electronics store.

Thank you Matthias,

I am planning on grabbing a full set of GHL fuses from aquadigital. I just want to get this up and running again as quickly as possible!

Hello,

first, I do not speak very well English.

I have profilux II and I have a problem with "dosing pump unit (4)".

I have connected them to the S1-S4 (digital).

Extras-->Dosing Pumps
----------------------
Dosing pump Flowrate Rate/dosing Dosings/day Description
------------------------------------------------------------------
1 ................... 60 .............60..................1................ .A
2 ................... 60 .............60..................1................ .B
3 ................... 60 .............60..................1................ .C
4 ................... 60 .............60..................0................

Extras-->Socket functions
-------------------------
Socket Function Description
------------------------------------------------------
S1.........Dosing pump 1...................A
S2.........Dosing pump 2...................B
S3.........Dosing pump 3...................C
S4.........Dosing pump 4
S5.........Timer 1............................T5
..........
..........
..........


I have marked "Digital powerbar connected on S1-S4"

I have pressed the button "Program digital......."

My question:

If it is correct, where the hour of starting is programmed?

Thanks for all.

EgaReef

dosing pump no 4 you have 0 for dosing days, so it wont dose anything.

Thanks, but..

No, the unit number 4 I still do not use it.

But,

unit 1 started to 00:00 hours
unit 2 started to 00:07 hours
unit 3 started to 00:15 hours

all perfect one.

The hour can be changed to start?

Thanks

Hi

in dosing mode the start time can't be changed, the times are calculated automatically. If you want to dose at specific times you have to use a timer instead of the dosing function.

thanks.

hello,

I have another question (I want to connect two tunze 6055):

I have connected to L1/L2 the module EVG-AP 2F with a single dimmable balasts (L1) and free L2. To L3/L4 I have connected MoonWB (L3) and free L4.

If I buy the module YL2-1 (connected to L3/L4), I can connect MoonWB and a tunze 6055.

how can I connect the other tunze?

thank you