Tapped out a 4x4x4 box to keep everything together.
http://i617.photobucket.com/albums/t...ps46e684ab.jpg

Disassemble jeboa control and steal whats needed inside.
Being careful to label the wires coming off the boards.
http://i617.photobucket.com/albums/t...ps1549de90.jpg
http://i617.photobucket.com/albums/t...ps03710dc4.jpg
http://i617.photobucket.com/albums/t...ps581c2108.jpg
http://i617.photobucket.com/albums/t...ps451fac67.jpg

Discard of old controller as we will no longer be needing that....
http://i617.photobucket.com/albums/t...psa4a415de.jpg

Harness.
 

Wiring schematic to come, i just have to draw it up.
Here is a picture of the completed box, I wired the AC/DC adapter external because of heat given off.
http://i617.photobucket.com/albums/t...psa2d8e448.jpg
http://i617.photobucket.com/albums/t...psce2bddb8.jpg

And here it is mounted under the tank.
http://i617.photobucket.com/albums/t...psdcda2b52.jpg

End result...
 

http://i617.photobucket.com/albums/t...ps77a04d92.jpg
http://i617.photobucket.com/albums/t...ps568abc35.jpg

Very nicely done. I'd have to say I'm not sure I could pull that off. But I might have to give it a try.
Where do you source all your parts?

J,
It's easy, I got everything from Rona except the EVG card.
I'll get that wiring diagram up and a few more pics just so you can see it a bit better.

You are part Codfather and part Godfather!!!!

Thanks a ton for the writeup. I am going to do this when I get my controller for sure!

1-5v reminder
 

Just a reminder that the signal is 1-5volt. so knock it down.
http://i617.photobucket.com/albums/t...ps1b556d94.jpg

Your welcome, lmk if you need a hand with anything.

quick wiring drawing
 

Ok, ya I know its not pretty, but you get the hint.
First of all, do not go by wire colour.....
both controllers had different colour wire inside the controller
First one to laugh gets it........
Just trying to keep it simple.

http://i617.photobucket.com/albums/t...ps953ad83a.jpg