That might just be my reasoning to persuade him to pick something else.. :lol: I'd rather have some cleaner shrimp which will probably be more beneficial to the tank anyways. Especially if we're not gonna see the lobster much.

I'm actually buying that for myself.. :lol: Although until I can find a place to rent/own that will allow me to start my 62G I may run it on this tank... but to answer your question, Yes I will be adding the pH probe.. :razz:

Well it seems like if something can go wrong with my builds it does.. No super serious, but looks like I will have to take my brand new Water Blaster HY7000 pump into to Concepts to get checked out... I fired it up this morning and it was fairly silent, after a few hours I could hear it from my office. Loud humming noise that started to get a bit of a clicking noise that you could hear in the rotation.. unplugged it at that point. :neutral:

Hopefully it is a simple fix.

Well Dave made my life easy today..

Took the WB7000 back to him.. and downgraded for the 5000. I really think the 7K was too much for this system... I know fishytime is running the 7K on his 260G (+100G sump).. My overflows were getting a ton of bubbles from the flow crashing over...

So I took the WB5000 and a Sedra something-er-rather that I need to feed my skimmer and called it a day.

The 5000 works MUCH better IMO, it's quiet, and the overflows aren't filled with as many bubbles.

The Sedra on the other hand seems to be too much pump for this Skimz 202... It calls for a 500gph feed pump, which the sedra maxes out at, but I am getting MASSIVE amounts of micro-bubbles throughout the sump and returning up to the Display.. So I picked up some plumbing supplies tonight including a ball valve so I can control the flow and dial in the skimmer.


I can't wait to get this thing running smoothly so I can finally work an 8am-430pm shift, instead of the current 8am-8pm.. :lol:

Photo-dump!

Eggcrate gone.. Sand in..

http://i1258.photobucket.com/albums/...Tank/tank1.jpg

After adding the sand in the light from the tank no longer lights up the sump area. Not impressed with that (although knowing it was inevitable), I decided to shed some light on the situation. :lol:

http://i1258.photobucket.com/albums/...Tank/tank2.jpg

In a giant box of misc aquarium stuff that came with the tank, I found myself 3 Marineland LED lights. While not powerful enough to use over the tank, I decided that one of them should work nicely in the sump area. Tossed some screws into the stand, a few zip-ties later and voila!

http://i1258.photobucket.com/albums/...Tank/tank3.jpg


The Skimmer slowly seems to be breaking in. I was having a **ck of time with it yesterday, overflowed a couple times, I was getting an incredible amount of microbubbles back into my sump/DT.. I turned it off last night when I left the office, however I've had it running the whole time I've been here this morning and so far is seems a better. I don't have the light overs the tank on, so its difficult to tell if I have any microbubbles making their way to the DT.

I'm really not sure if I should even run the skimmer for now as there is nothing alive in the tank yet, I only start adding Zeobak yesterday. Will pick up a few prawns or shrimp today to kick start the cycle. Only reason the skimmer is really running it to break it in, and in combination with a 300 micron sock, try and polish the water after adding the sand.

http://i1258.photobucket.com/albums/...Tank/tank4.jpg

http://i1258.photobucket.com/albums/...Tank/tank5.jpg

Well this weekend was a bit of a pain in the arse..

I wasn't sure what my evaporation was going to be like on this tank. This weekend opened my eyes.

I topped it off Friday night before going home, with plans of coming in Saturday anyways to rearrange my office so I actually have a view of the tank. :lol:

Came in Saturday about 10am. And checked the tank, only to realize my sump had dropped by about 1.5" in water level just overnight, and that happened without any lights on. So its obviously dry in the office, needless to say I had to get a ATO sooner than later as I can't be coming into the office 7 days a week. :lol: Although I never budgeted for a $175 Tunze ATO I figured it was time to DIY this part of the build.

Put in an order on Aquahub.com this morning..

http://www.aquahub.com/store/media/TopitOffPremium.jpg

Hopefully it gets here before next weekend, but I'm not holding my breath.

I love the build, looks great so far. Dave has a very good idea with the baffles in the sump, one of the biggest cause for bubbles in my tank was the waterfall off my last baffle, this idea fixes that. One thing you could do to "failsafe" your ATO is to have your water enter the sump through a float valve AFTER your ATO setup. Since you won't be around for weekends, it could be very bad to have a switch stick on. Here's what i use for mine http://www.jlaquatics.com/product/ro...O+Filters.html Up to you really, most people run just the ATO without problems.

Yup, I agree. We had it in the 180 display at proreef (before closing down) and I had a few choice words for the stupid eggcrate. Just put rock inbefore sand...same stability! Also when u decide to up grade to some kick as vortech pumps, the sand could move more water and expose the eggcrate. also love the overflow, very sharp looking. But I think there is one SUPER IMPORTANT piece of equipment you may have over looked.....chiller??? Especially with halides. Also, drilling ur rock can give you more open areas and unique aquascaping options rather than the rock wall or rock pile looks. More negative space is nice for bigger tangs and then u will have more room for SPS ;0)....just saying!

Oh dandy. :lol: I just did my new 30g with eggcrate and sandbed because yours looked so good.

I figured he meant eggcrate gone under sand :)

Bingo! I thought about changing it after, but meh...