Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Tank Journal (http://www.canreef.com/vbulletin/forumdisplay.php?f=18)
-   -   My Half in, half out of wall 330 starfire build. (http://www.canreef.com/vbulletin/showthread.php?t=95435)

Jeff000 03-10-2013 07:53 PM

Looks like the hanging frag tank is going to be coming down. I can't get my skimmer into the sump with it there. Sigh, anyone looking for a frag tank?

gregzz4 03-10-2013 08:01 PM

Maybe others have better luck than I, but I had too much trouble adjusting reactor flow rates off of one common pump
Adjusting one would mess with another, or the return flow
This would be an even bigger issue during maintenance

Mine hang in the sump, and I ended up using individual powerheads and a T with valve on each for flow adjustments

Jeff000 03-13-2013 07:35 PM

Got a little more work done and started to fill it.

I put up some drywall on the ceiling above the tank.
This is the last screw.... and how close it made it before my last of 8 batteries died and I couldn't find a screw driver (left my tool bag at work).
http://farm9.staticflickr.com/8230/8...55b025ac_c.jpg
Of course right. I ended up using a robertson and a hammer to get it to a point I could mud over it.


Look water is finally going in!
http://farm9.staticflickr.com/8515/8...a419efa9_c.jpg

After about 24 hours
http://farm9.staticflickr.com/8521/8...54ed66ba_c.jpg

And a little look at how the show side of it is turning out. And yes I know I need some staples for the electrical.
http://farm9.staticflickr.com/8527/8...2f7abd6e_c.jpg

I have a heater in it right now with a power head, I want to start getting the salt where it needs to be and the temp so I can put a couple rocks in there.

I need to finish the plumbing, but waiting on some vibration isolation to mount the pump on.

lastlight 03-13-2013 07:40 PM

looking great.

that ductwork above the tank isn't exposed inside the canopy is it?

Jeff000 03-13-2013 08:06 PM

Quote:

Originally Posted by lastlight (Post 801898)
looking great.

that ductwork above the tank isn't exposed inside the canopy is it?

Thanks,

I have drywall above the tank, and it's just the cold air return shiny cardboard stuff.
I'll take another picture today.

Jeff000 03-23-2013 10:16 PM

Got lots done now, fish are in the tank, and everything is coming together, just a massive mess right now.


Here are the drains finished.
http://farm9.staticflickr.com/8382/8...deb1b629_c.jpg

Overflow kinda finished, the right pipe is my emergency pipe, I have a T on it right now because I cut the pipe a 1/2" too short.
http://farm9.staticflickr.com/8520/8...a9e15e62_c.jpg

Gap between the tank and the wall above it, I think I'll use that pond spray foam to fill the gap?
http://farm9.staticflickr.com/8381/8...bf197b9f_c.jpg

All the fish in, and my first aquascape, most fish still hiding.
http://farm9.staticflickr.com/8093/8...9fb4c5df_c.jpg

Vertex Alpha 300, this is a big skimmer, dual pumps, but dead quiet.
http://farm9.staticflickr.com/8373/8...433d724b_c.jpg

Looking into the sump... not sure I like just having a bunch of live rock in there, but not sure what else I would do.
http://farm9.staticflickr.com/8518/8...91aa03de_z.jpg

Vibration isolation mounts for my pump, started with a hammerhead, but that pumped just too much water for my overflow weir to handle, this barracuda flows a much more appropriate rate.
http://farm9.staticflickr.com/8086/8...04a8792d_c.jpg

And the current aquascape, not sure I am really happy with it still.
http://farm9.staticflickr.com/8374/8...ea90aaf7_c.jpg


And a couple fish shots here.
http://farm9.staticflickr.com/8245/8...da5aa3f4_c.jpg
http://farm9.staticflickr.com/8384/8...72ed0136_c.jpg

reef-keeper 03-24-2013 12:45 AM

This build is just fabulous. It's close to the same as what I'm planing with my 135.

Delphinus 03-24-2013 12:49 AM

Looks great so far!

I like those mounting rails you're using for the pipes, and the clips - where do you find those?

Jeff000 03-24-2013 02:29 AM

Quote:

Originally Posted by reef-keeper (Post 805087)
This build is just fabulous. It's close to the same as what I'm planing with my 135.

Thanks


Quote:

Originally Posted by Delphinus (Post 805091)
Looks great so far!

I like those mounting rails you're using for the pipes, and the clips - where do you find those?

Thanks.

Those are called unistrut or just strut. I used aluminium strut for those, it's about 20 bucks for 10'. And the clamps are called P-clamps or cobra clamps. You buy them for the size of pipe you want.
You can get it any electrical wholesaler, probably plumbers too. But I am a sparky so I go with what I know.
My water mix station is made from normal strut that I painted. And the frag tank is hanging with ready rod from strut, and there is strut under the frag tank.
You can get hundreds of different connecting parts for strut too.
http://www.unistrut.us/

Jeff000 03-28-2013 01:46 AM

Added a couple chairs.
http://farm9.staticflickr.com/8530/8...c26edd03_c.jpg
Finally at a point I can kick my feet up and enjoy it. Need a few more fish, a lot of corals, and still lots of little things to do, but at least I can kick my feet up now and then.


All times are GMT. The time now is 01:32 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.