sounds like right on topic :)

So to mount these I used coat hangers that I cut to put between the Sol modules and used picture frame hangers to hang these little Ecoxotic fixtures. It looks as though there is a red strip that is beeming down in to the tank, but it just looks like that on the mesh screen and not in the tank.

http://i255.photobucket.com/albums/h...coxotic001.jpg

Here they are with the reds on:

http://i255.photobucket.com/albums/h...coxotic003.jpg

And the reds off:

http://i255.photobucket.com/albums/h...coxotic006.jpg

My settings on my Sols are at 15%White 25%Blue 35%Royal Blue in both pics.

There is alot of different color combos that can be used with these, here's a pic of the remote for an example:

http://i255.photobucket.com/albums/h...e/ecoxotic.jpg

That is one of the coolest things I have ever seen for fish tanks. It certainly helps to customize the lighting.

On a side note I suddenly want smarties :razz:


Brad, are you telling me you spent how much and you still need MOAR lighting??? :confused:

Brad, nothing wrong with the lights you got except they haven't caught up to the proper colors. so many out there are still using a cool white/royal blue combo which sucks for reds. the good DIY ones are using a combo of different whites, royal blue, regular blue, and true violet. some are adding green and red to thoes also, but in my opinion you only need the green and red if you are only using cool white, if you go to nutral white and warm white you get green and red in there spectrum.

the issue isn't the technology but rather the narrow spectrum of LEDs and not understanding this when you put a system togeather. your radium uses a combanation of all colors of light to make the 20K color, but you can get 20K from a royal blue LED just using the blue part of the spectrum, so no red or green. the lack of the other two colors is what will cause some others not to show up good.

you could probably add a strip to each LED that has two true violets, 1 red and one green to each light. put the green and reds on one dimmer and the TV's on another so you can just add as much as you need, problem is it won't be sync'ed with your lights you have now.

Pick Milad's ear with what you have and how to set it up. he is close to you and has realy been getting into the full spectrum side.

Steve

Brad I don't know if this has any relevance but I have a pink and blue millie that I got from a frag form Wendell (OA) years ago. I've had it under 250w 10k xms, radiums and 150w 10k ushio's. When it was high up in the lights, (xm's and radiums) it stayed pink and blue but when it was at the bottom of the tank and shaded, it went all blue, under the 150w light it was brown with blue tints. Right now it is under radiums and definitely pink and blue......I'm thinking you have a lower light situation, not really something you want to hear after spending money on leds but I can't help but think that 150 watts of light is the same no matter what kind of lights we use

Marie, I would agree only if the other corals around it were acting the same. But this one is right up under the light, maybe 6inches under waterline. I have a pink milli, same height on the other side of the tank, it's doing incredible, holding it's pink very well. I'm not saying lack of light isn't it though, because it was in the same spot under the 400w. And you're right, one SOL unit is not anywhere near a 400w MH bulb in intensity.

Sounds like I need to supplement the LED with MH bulbs :razz:

+1 to adding some supplemental LEDS... Check out the Ocean's White 3-up led and some violets

Aquattro

I have a brilliant idea for you....

How about you send over some frags and ill put them under a LED full spectrum build and in a couple weeks you can see if it makes a substantial difference to you...

That's not altogether a bad idea. Let me figure that out, and we'll see what we can do :)

I would of course purchase them off you. Just give me a good deal and pick the ones that are orange/red/pink that you feel arent giving their true color.