Canreef Aquatics Bulletin Board
Page 4 of 4 « First < 23 4
Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Tank Journal (http://www.canreef.com/vbulletin/forumdisplay.php?f=18)
-   -   Tylers Tank Build (http://www.canreef.com/vbulletin/showthread.php?t=108454)

spit.fire 10-07-2014 03:28 AM
Quote:
Originally Posted by mike31154 (Post 915996)
Are you using any kind of lubrication? I broke a few taps as well on aluminum work until I started using a bit of diesel fuel as lube. Kerosene or Mineral spirits might work as well, don't recall what the recommended lube for tapping alu is, but if you do a search I'm sure you'll hit the jackpot.

I used wd40, they were breaking because of the fins on the heatsinks

spit.fire 12-26-2014 04:01 AM
Got some new corals

http://tapatalk.imageshack.com/v2/14...986bf16f72.jpg

Anything Albert says is a lie

spit.fire 12-27-2014 11:43 PM
Version 3 of the hybrid

http://tapatalk.imageshack.com/v2/14...306ac50c3c.jpg

spit.fire 12-28-2014 10:39 AM
T5's all mounted and wired, leds mounted but not wired (misplaced a driver) http://tapatalk.imageshack.com/v2/14...8ac51f993c.jpg

spit.fire 12-30-2014 10:53 AM
Wife's side

http://tapatalk.imageshack.com/v2/14...961c2f4a3a.jpg

spit.fire 01-02-2015 12:12 AM
Hybrid hung, might just put non dimmable drivers in it

Only 1 channel on in pic and old t5 bulbs


http://tapatalk.imageshack.com/v2/15...a1a8b74d0e.jpg
http://tapatalk.imageshack.com/v2/15...f40eead2c5.jpg

spit.fire 02-11-2015 05:53 PM
Few shots of the wife's side
http://tapatalk.imageshack.com/v2/15...ca3aac2391.jpghttp://tapatalk.imageshack.com/v2/15...401717f4b6.jpghttp://tapatalk.imageshack.com/v2/15...486bc78269.jpg


All times are GMT. The time now is 12:26 AM.
Page 4 of 4 « First < 23 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.