Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Polls (http://www.canreef.com/vbulletin/forumdisplay.php?f=34)

- - Gfci ...... (http://www.canreef.com/vbulletin/showthread.php?t=66824)

Quote:

Originally Posted by whatcaneyedo (Post 539339)

I've personally had it happen as well were
These are the 5 cases I mentioned to the best of my knowledge.
1. Water ran down a cord to the electrical socket behind the tank. Fire originates at electrical socket. The fire does enough damage to kill everything in the tank.
2. Previously overloaded timer presently being used to turn a 150W MH on and off spontaneously catches fire. The fire leaves some black scorch marks around the timer.
3. A powerbar sitting on the floor behind a tank subjected to a lot moisture and corrosion catches fire and leaves black scorch marks on the wall behind the tank.
4. The ballast blows (why? no one knows...) in a regular fluorescent light fixture above a tank. The fire does significant damage to the basement of the house, the aquarium glass explodes onto the floor.
5. Another regular florescent fixture hanging over a tank begins to smoke (moisture, corrosion, spray? I dont know). The smoke is significant and everything in the tank dies.

Based on this little information could none of these have been prevented with GFIs? In at least 3 of the 5 cases it was a combination of electricity+water=fire. If a GFI trips when electricity and water meet is it not conceivable that they would prevent a fire?

Thats the common misconception regarding GFIs its not the water that trips them, its the ground or lack there of. A GFI will only trip when the power moving from the receptacle to the object being powered does not match what is moving back into the receptacle, from said object. That may be just getting wet or that may mean it getting wet while you are holding it or any other number of possibilities/situations. It does not sound like a grounding problem in any of those instances, sounds like an arcing problem from here.

an example

http://www.youtube.com/watch?v=MhW9V...eature=related

Quote:

Originally Posted by Doug (Post 539388)

AFCI cant run everything though, as it wont fire halides.

I didn't know that, I fused my blue wave 7 without issue. I will have to give the Afi a shot and see what happens. Im wondering if this would only be an issue with ballasts involving an integrated ignitor.

Induction loads such as a MH or motor starting can trip a AFCI.

As far as GFCI protecting us from fires. It will protect us from some fires.... It is pretty good at protecting from fires caused by water on recepticles.

Quote:

Originally Posted by RR37 (Post 539331)

I think you missed the point,

GFI = GOOD

AFCI or FUSE = GOOD

Using both = DOUBLE GOOD

Not knocking a GFCI I think the are a necessity. Anyone not having one should think about getting one. While you are doing the GFI, look into fusing your system somehow. Claiming they will prevent fire is a false sense of security, A GFI will prevent unwanted shock and electrocution, seeing as that is all they were designed to do. ( In a situation where a fault in grounding is present )

There are any number of reasons why your power-strip is charred, not having a surge protector, circuit overloading, missing internal circuit breaker, power strip daisy chaining, plugging addition items into the duplex outlet, repeated moisture damage, to name a few. In any event all of the things listed will go unnoticed by the GFI, they are only there for ground faults. Please do not attempt to inform people otherwise, your logic is flawed. Its not a matter of opinion, its a static right/wrong.

Don't mean to come off harsh. Just happens that way.

No problemo, I will play nicely in your sand box. HEHE...

Thanks for the advice on the AFCI, this looks like something you add beside the normal breaker in your breaker box? If so, again thanks, I will research this more.

Quote:

Originally Posted by RR37 (Post 539486)

Could be. I dont recall which ballast I was running. I have not fired one on that line since, having put in a second aquarium only circuit. It does fine with t-5 bulbs though.

Quote:

Originally Posted by globaldesigns (Post 539527)

They are code in some places for bathrooms and bedrooms. All mine are on them. They replace the standard breakers. I have posted pics of them a couple times now. Latest is here,

http://www.canreef.com/vbulletin/sho...+storms&page=3

RR37 is correct, gfci prevents electrocution via ground fault, the rececptacle has a HOT terminal and a COMMON or NEUTRAL terminal which is connected to ground at your breaker panel, a ground fault occurs when the electrical path bypasses the COMMON terminal. e.g. through a faulty heater, into your water then through your body to a cement floor, and the floor doesn't have to be wet to make a good connection to ground. if you touch both terminals at the receptacle, you will get electrocuted because that is not a ground fault. also, if the electricity is arcing across a wet or faulty appliance and the path is not a ground fault then the receptacle will not trip and a fire will possibly be the result.

actualy if you stick your fingers on two of the tremanals it will go out as that is a ground fault. same as if it is submurged in water. theree is also a posibility it will go out by water being splashed on the power bar, now that I think about it. if enough water splashes the recepticle it will great a path to ground causing it to trip. if you didn't have a GFIC when this happened it would have to be enough water to cause a short circuit so your pannel breaker would trip.

Steve

I don't know much about the technical aspect of GFIC's but I do know that when I noticed my power head in my tank wasn't working I saw that the GFIC had been tripped. So I unplugged the cord, reset the GFIC and then plugged the cord back in again, and again it tripped the GFIC, the breaker the GFIC was on never tripped, it only tripped the GFIC.

When I finally looked back behind the tank and examined the power cord, much to my shock this is what I found:

http://i261.photobucket.com/albums/i...p/P8060483.jpg

http://i261.photobucket.com/albums/i...p/P8060485.jpg

All I have to say is thank God that the GFIC tripped, because the breaker it was on never did. Also very thankful that the only thing that got fried was the power cord and power head. I'm guessing water splashed out of the tank and onto the extension cord, causing a small electrical fire (which you can see the damage done to the cords in the above pic.'s) causing the GFIC to trip. Needless to say IMO if the GFIC hadn't tripped (or if I didn't have one) I'm guessing the damage would of been a lot worse!

It sounds like everyone in this thread thinks they know what they are talking about, but in reality it is a bunch of opinions without much education on a topic that is pretty important, and doesn't have room for opinions. Electricity doesn't run on opinion, it runs on predictable facts. Time for an electrician to chime in, and state the facts. ;)