|
Yea that's why I'm going to the Hanna low range checker I was sick as tired of guessing if this tint of blue was a bit bluer then That tint of blue
|
My Reagent lot #'s are:
A: 10305114 B: 10305115 I have the Hanna meter also, and generally love it, except as noted earlier, I got 2 readings of 0.13 and 0.00 from the same lot #, which lead me to pickup the Elos, and it shows fully colorless :/ The procedure with the Hanna is not ideal... I'm sure more people are with me in that I'm very willing to pay more for a more precise (foolproof), and SIMPLE, test for some of these things. Phosphate and Alk specifically... I would love a simple test (probe or even titration), that was solid, I'm good for a recurring $100/year-ish or even a higher one-time rig! |
Too bad they don't make a machine thats small you put a sample in a it spits out cal mag alk phos and nitrate lol
|
Quote:
http://thriveaquatics.com/products/t...water-lab.html http://reefbuilders.com/2013/02/20/thrive-water-lab/ :D |
That thing is pretty cool
|
So I pull out the old api kit and test my phophates and it reads 2. Yes not .2 but 2 so I immedietly switched out my phosphate media. No wonder I had a cyano break out and I thought it was because I was dosing vodka to get my nitrates down. Weird part is I never got any type of nuisance algae except cyano and yellow corals turned green.
Conclusion: bad elos test kit Thanks for everyones help |
Quote:
|
Quote:
Next wave the chicken in counter-clockwise circles around your tester. For the love of God DON'T go clockwise, that's big trouble. After you've done six complete rotations and 1 half rotation raise the chicken to the East. It has to be the East because the West is for Alk testing. Next put on a pair of non-latex powder-free rainforest friendly examination gloves, blue if you can find them. After you have the gloves on put the chicken in a brown burlap bag and place it in the corner of the room furthest away from your sump. Keep in mind this only works if you have more yellow fish than orange or blue. For blue fish the process is totally different. Once the bagged chicken is in the corner furthest from your sump you take the checker and spill some water in the middle of the pentagram on the floor. I forgot to mention the pentagram on the floor, draw it in orange or white chalk, white is a little easier to find and it tastes better in step 27. It goes on from here... |
Quote:
Ok I'm half way done and satin is asking for my first born clownfish, what's next? |
Quote:
Be sure the vial is always clean, inside and out. After the C2 comes on, note the exact time in seconds and pour the reagent into the vial, and swirl for almost the full 3 min. It is very important that all the powder is dissolved and no micro bubbles. Then insert, close, and hold the button until the 3 min timer shows on the display. If you just press and release, you will get a reading but it will not be accurate. After the 3 min counts down, you will get your reading. My Hanna checker readings are consistently accurate, and usually don't vary more than .01 when I have done more than one test. Before when I was using the color test kits, they would read zero while the Hanna would read .6 and higher. It is very hard to distinguish white, and a slight off white, and they always read too low. I use the Low Range Hanna Phosphate Checker, model HI 713 and reagents are HI 713-25. |
| All times are GMT. The time now is 08:00 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.