Canreef Aquatics Bulletin Board
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   Cad Lights Conic Bio-Reactor (http://www.canreef.com/vbulletin/showthread.php?t=92620)

Jaws 12-18-2012 11:27 PM
Thanks Jon. So despite it being a bit overpriced, does it work and would you buy it again?

cblair 12-19-2012 07:50 AM
In my opinion if your looking for a recirculating reactor then this will be the cheapest option. Mine works great once you get your desired discharge flow and a good tumble on the pellets.

Treebeard 02-14-2013 02:48 PM
What kind of fitting did you use to connect to the output of that three-way reactor output valve? I was planning on running a piece of flexible tubing from the reactor output to the intake on my skimmer but the output on the reactor is an odd-ball size. 1/2" ID tubing is too small and 5/8" is too big.



Quote:
Originally Posted by cblair (Post 774177)
I just bought one of these from J&L about a month ago and I'm very happy with it. The tumble on the pellets is great, I'm not sure you would have enough flow to be the only feed for a skimmer. I just place the out put of reactor right at the skimmer intake using a 90 degree barb fitting. Works great skimmer pulls a tone of junk out and with it being a recirculating design you can adjust the output of the reactor to your tank needs, I have not had a cyano bloom or anything, just nitrate reduction. So for my personal opinion I would recommend this reactor


All times are GMT. The time now is 06:38 PM.
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.