Thanks! i just called up kings ed it seems like they will have it in stock by Friday :cry:

Plumbing noise problem
 

on my overflow box it's been having this splash noise it's really really loud. not sure but the splash is crazy.

http://www.canreef.com/vbulletin/att...1&d=1335935842

BUMMP help.

What does the plumbing look like on the inside of the overflow? Is is just draining through the bulkhead?

Might use an external Durso

http://www.nano-reef.com/gallery/data/500/extdurso.jpg

ohh no.. I have to take this apart?? could I just drill the top?

I'm not an expert by any means, but I would think just drilling the top of the elbow would cause a leak.

You could do a type of duriso standpipe with that set-up. The part with the air hole would have to be higher than the tank to prevent water from coming out of it



http://t2.gstatic.com/images?q=tbn:A...ukHtrZzMF2c9OA

Your going to want to replace that 90 with a T. Put a cap in the top of the T with an air hole drilled. I you want to get fancy you can run a piece of air line with a valve out of the air hole.

What your going to have to make is an external durso standpipe. If you google it you should be able to find diagrams.