Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   A little help setting up my doser........ (http://www.canreef.com/vbulletin/showthread.php?t=83562)

christyf5 02-27-2012 12:46 AM

Quote:

Originally Posted by The Grizz (Post 686884)
I have some of LittleSilverMax's mag mix left that I want to use up so I would guess around 3 cups of it.

I'm using 5 and half (not sure where I got that number from though). But you can pretty much add whatever you like and just watch your levels and dose accordingly :biggrin:

The Grizz 02-27-2012 12:48 AM

Quote:

Originally Posted by Elias@caco3reef.com (Post 686917)
its always a pain when starting a dosing regime as to how much of each diluted chemical to add to your specific tank and the answer is simply what Cuz said
If you are asking for chemical addition to your 1 gallon of RO water try what I have here caco3reef.bulk-chemicals and go read up under each chemical I have as there are recipes.But to be honest you are using chemicals that is I believe 1 to 1.5 years old :biggrin: and from what I heard from some Canreefers (its not the best...) and after you are finished with these chemicals and start with a different type your recipe will need to go through a little changes as not all chemicals have the same concentration.Hope that helps getting things started...

Your site was my next stop :biggrin: the mag mix I have here is from Max's very last batch of last year so it's not that old.

The Grizz 02-27-2012 12:50 AM

Quote:

Originally Posted by christyf5 (Post 686919)
I'm using 5 and half (not sure where I got that number from though). But you can pretty much add whatever you like and just watch your levels and dose accordingly :biggrin:

Cool thanks Christy

e46er 02-27-2012 12:59 AM

Test your tank for cal alk wait 24 hours test again
This will tell you your tanks demands
Use this chart to find out hOw much product. Is required to keep the levels optimal then decide how often you want your doser to run (cycles) find out your dosers pump rating

http://reef.diesyst.com/chemcalc/chemcalc.html
Mine for example runs for 29 sec every 2 hours

The Grizz 02-27-2012 01:14 AM

Quote:

Originally Posted by e46er (Post 686928)
Test your tank for cal alk wait 24 hours test again
This will tell you your tanks demands
Use this chart to find out hOw much product. Is required to keep the levels optimal then decide how often you want your doser to run (cycles) find out your dosers pump rating

http://reef.diesyst.com/chemcalc/chemcalc.html
Mine for example runs for 29 sec every 2 hours

I know how to figure out what & how to does, what I was asking is how much additive to add to 1 gallon of RO water to dose from. I don't want to much or to little additive in my dosing containers.

eli@fijireefrock.com 02-27-2012 01:23 AM

Quote:

Originally Posted by The Grizz (Post 686933)
I know how to figure out what & how to does, what I was asking is how much additive to add to 1 gallon of RO water to dose from. I don't want to much or to little additive in my dosing containers.

Ok total concentration of chemicals to a gallon of water is as follow:
Calcium chloride 2.25 cups/gallon RO water
Magnesium
Magnesium Sulfate 3cups
Magnesium Chloride 5 cups
/gallon RO water
Soda Ash 1.5 cups/gallon RO water

Don't go over these parameters,those concentrations will vary your dosing regime. The way I see it,I hate mixing the chemicals so why go 1/2 or even 1/3 of concentration.

The Grizz 02-27-2012 01:36 AM

Now that what I'm talking about, thanks Eli.

christyf5 02-27-2012 01:52 AM

Quote:

Originally Posted by The Grizz (Post 686921)
the mag mix I have here is from Max's very last batch of last year so it's not that old.

I'm still working through his batch of magnesium mix(I went a little nuts on the order as he was shutting down and I didn't know where else to get it, so I have a ton!) and its totally fine.

christyf5 02-27-2012 01:53 AM

Quote:

Originally Posted by Elias@caco3reef.com (Post 686938)
Ok total concentration of chemicals to a gallon of water is as follow:
Calcium chloride 2.25 cups/gallon RO water
Magnesium
Magnesium Sulfate 3cups
Magnesium Chloride 5 cups
/gallon RO water
Soda Ash 1.5 cups/gallon RO water

Don't go over these parameters,those concentrations will vary your dosing regime. The way I see it,I hate mixing the chemicals so why go 1/2 or even 1/3 of concentration.

LOL, I knew it was more than 5 cups but couldn't remember. Thanks Elias! I add the 8 cups as my mag is already mixed together (I use a half cup to add it and sometimes I lose count :razz:)

e46er 02-27-2012 07:35 PM

Quote:

Originally Posted by The Grizz (Post 686933)
I know how to figure out what & how to does, what I was asking is how much additive to add to 1 gallon of RO water to dose from. I don't want to much or to little additive in my dosing containers.

The first link I send you to randy holmes farely told you everything you needed to know and gave you a much cheeper solution to soda ash ........


All times are GMT. The time now is 04:20 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.