Canreef Aquatics Bulletin Board - Red Sea Max 130D

Page 2 of 3

Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Modular LED (http://www.canreef.com/vbulletin/forumdisplay.php?f=219)

- - Red Sea Max 130D - LED Retrofit (http://www.canreef.com/vbulletin/showthread.php?t=80256)

martinmcnally

11-21-2011 10:58 PM

Quote:

Originally Posted by ponokareefer (Post 652373)

Is there room left in the hood for the dimming kit, or does it need to be placed outside of it?

Dimming kit goes inside. Take a look at the full instructions link. About half way down you will see where I installed the dimmers.

ponokareefer

11-22-2011 12:42 AM

Quote:

Originally Posted by martinmcnally (Post 652514)

Dimming kit goes inside. Take a look at the full instructions link. About half way down you will see where I installed the dimmers.

Sorry, my bad.

intarsiabox

11-22-2011 12:43 AM

Quote:

Originally Posted by msjboy (Post 652450)

Would be interesting to see how modularled's setup compares though. I think 2 stunner strips probably will be necessary.

msjboy

Why would a strip of 1W LEDs be necessary?

martinmcnally

11-22-2011 12:49 AM

Quote:

Originally Posted by intarsiabox (Post 652555)

Why would a strip of 1W LEDs be necessary?

You certainly do not need any additional lumens but I think its more for eliminating shadows if you have tall rock work.

sphelps

11-22-2011 02:02 AM

Quote:

Originally Posted by martinmcnally (Post 652354)

The RSM hood already has 2 fans that will draw air in and over the heatsinks existing out the opposite side.

Cool, that sure makes things nice and easy! Nice write up!

stevenk

11-23-2011 05:24 PM

I have one of these retrofit LED kits on they way from Modular LED, should be here today. I will put some before and after pics up.

lee9	12-11-2011 02:43 AM

Are you planning on doing a RSM 250 kit also?

martinmcnally

12-11-2011 11:43 PM

Yes I am going to make a 250 kit as soon as th holidays are over.

wehtam

01-25-2012 03:20 AM

Awesome. Definately interested in this kit when my lights are up for renewal...( in a few months) lol. I'll keep this in mind. As for the stunner strips, I don't see why you need them cause you don't have them with the PC. Unless its for like you said to eliminate shadows with tall rock work.

Looking forward to pics of a running tank!!!

Mat

BigAl07

01-26-2012 05:44 PM

Here's a picture and a couple of videos of Martin's kit on my 130D. At the time of these images the tank was in early DUSK mode (blues only) so everything looks a bit more blue/deep than it does during other times of the day.

http://i217.photobucket.com/albums/c..._1_5_20128.jpg

Front Tank Video
http://i217.photobucket.com/albums/c...S_1_5_2012.jpg

Top Down Video
http://i217.photobucket.com/albums/c...n_1_5_2012.jpg

All times are GMT. The time now is 07:10 PM.

Page 2 of 3

Show 40 post(s) from this thread on one page