![]() |
Hey Seth, nice tank. Looks like frag city :razz:
Closeups!!!! :biggrin: |
Seth, on the right, is that a DIY 500W halogen fixture converted into a 150W DE halide enclosure?
|
THanks guys!
And yes, thats a regent 500W pendent which I converted. :razz: |
Nice tank.If you don't mind me asking,how much did the regent fixture cost?I'm thinking about doing the same. :biggrin:
Jim |
Very nice! Your lighting setup is interesting too.
Man...I love clean tanks :mrgreen: |
kuatto- the regent fixture costed like 15 bucks at homedepot. You can find it in the outdoor security light section. I think walmart also carries it and it's cheaper at wallmart, like 13 bucks. Not expensive. The reflector kinda sucks though but better than nothing I guess.
|
Quote:
|
Hi Bob_I, the parts you need are:
150W bulb ~$70 150W ballast $50 (make sure it runs doubled ended bulbs, mine was electronic so I had no problems) 150W bulb socket ~$10 Regent Pendent $15 Wiring and stuff $5 Total ~$150 I got the ballast USED so that shaved off a few dollars. If you can't find a used one, they're usually around $110. Also because this was my first lighting DIY project, I had to buy the wires and those marrette connector things. I got the bulb from like petsupplyliquidator but I would recomment getting bulbs from hellolights.com. Got the ballast of someone on the net. Socket you can find at hellolights.com. Pendent and wiring and stuff at home depot. If you buy a retail pendent, its going to cost you around $400 bucks. DIY you can probably do it for $200 or less. But retail pendents have better reflectors and better design. |
Quote:
|
Oh they don't ship to Canada? I bought mine off the guy who sold me the ballast so I didn't know. Try searching around reefcentral or nano-reef.com or try petsupplyliquidator.com
|
All times are GMT. The time now is 03:26 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.