Canreef Aquatics Bulletin Board - how do I quiet down my overflow?

Page 2 of 2

Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)

- - how do I quiet down my overflow? (http://www.canreef.com/vbulletin/showthread.php?t=60593)

banditpowdercoat

01-29-2010 06:40 PM

Sounds like you need a Durso style standpipe. google Durso, you will find a ton of pictures and writeups how to make them near silent. My Durso on my 45g was pretty close to silent. Herbie is dead silent, but requires 2 holes for drains

The Grizz

01-29-2010 06:48 PM

My 155 is drilled in the back, 2 overflows what a racket. So I built 2 Hofer Gurgle Busters and that solve the problem. No I can hear if the sump is low and top it up right away.

This is my thread on it and a link to the Hofer build page:

http://www.canreef.com/vbulletin/showthread.php?t=58944

http://home.everestkc.net/jrobertson...struction.html

sphelps

01-29-2010 06:55 PM

Ok seriously we can't read minds:

What kind of standpipe are you running?
Do you have a hole drilled in the cap? If so what size?
What size is your drain (bulkhead size)?
What size piping is your standpipe made from?
What size pipe did you run for the drain from the tank to the sump?
What size return pump are you running? Estimate on actual flow rate to tank?

globaldesigns

01-29-2010 07:48 PM

I use Durso Standpipes, very easy to put together. Made my 2 overflows silent.

mark	01-30-2010 01:12 AM

Quote:

Originally Posted by 68shelby (Post 487135)

The overflow was only drilled with 1 large drain and 1 small hole for the return from the pump. It is making a sucking noise and at times it will just whoosh and then its quiet until the overflow fills again. Any ideas for the way it is drilled already, because emptying it is not an option.

Two drains lines for a Herbie, for one as said Durso, Hofer and also search on Stockman

All times are GMT. The time now is 11:14 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page