Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Lounge (http://www.canreef.com/vbulletin/forumdisplay.php?f=14)
-   -   Project Cars (http://www.canreef.com/vbulletin/showthread.php?t=59155)

the marine apprentice 01-01-2010 02:15 AM

Quote:

Originally Posted by MacheteAvenue (Post 475250)
my finished project
http://i324.photobucket.com/albums/k...8/cars/084.jpg

i miss my toy:(
http://i324.photobucket.com/albums/k...s/DSC_0002.jpg
re-built her rotten frame and everything
http://i324.photobucket.com/albums/k...s/DSC_0058.jpg
then i sold it for some odd reason


new projectish.. pretty much done too

I did a b16 v-tec swap and tein full coilovers
next its getting a turbo.

http://i324.photobucket.com/albums/k...s/DSC_0017.jpg

http://i324.photobucket.com/albums/k...s/DSC_0015.jpg

next car i want is either a nissan GTI-R or im going to get a 2nd gen rx7 with a blown motor and drop a 5.0L in it:mrgreen:

drop a 5.0 liter in an rx thats crazy, when all ya got to do is bridge port the 13b put a new carb and header on it and ya got 300hp nd it weighs half as much as a 5.0. just my opinion though. as i was going to do the same to my first gen rx when i ws back in highschool. had a done up 327 vett engine sittin beside my rx but then thought about all the mods id have to do with suspension rear end tranny and crap like that

the marine apprentice 01-01-2010 02:36 AM

my lil project
 
this is my 1974 mazda b1800 it is all original with 45000miles. i picked it up from an older couple who were the original owners since 1974 and drove it very little. i picked it up for $300. so now i am going to work on it all i can.
i am rebuilding a 12a rotory for it that i am getting bridge ported, a webber 45 carb kit and a header with 3 inch straight pipe exhaust. looking into getting some 17in chrome rims and some lower profile tires. i am hopeing it will be done by mid summer if all goes well with work.
http://i141.photobucket.com/albums/r...mazdaB1800.jpg

LeeR 01-01-2010 03:23 AM

Quote:

Originally Posted by the marine apprentice (Post 477114)
drop a 5.0 liter in an rx thats crazy, when all ya got to do is bridge port the 13b put a new carb and header on it and ya got 300hp nd it weighs half as much as a 5.0. just my opinion though. as i was going to do the same to my first gen rx when i ws back in highschool. had a done up 327 vett engine sittin beside my rx but then thought about all the mods id have to do with suspension rear end tranny and crap like that


2880lbs with a chevy motor the 5.0 is a bit lighter then the chevy.
2645lbs is a stock 2nd gen rx-7 the turbo 2 is 3003lbs

http://www.grannysspeedshop.com/

has a kit for under $1500

i would love to have a brudge ported rx7 they sound amazing but under 8 mpg... thats just retarded with bigger injectors tuned down and a better computer system i could be getting 20mpg and still have a awsome car.

the marine apprentice 01-01-2010 03:30 AM

not saying it would be a dumb idea it would be awesome to do that. i had a buddy who used to live in edmonton who put a 5.0 in his first gen and it was just crazy the power he had. it was gonna be alot of work for me to do that when i was 17 but now that im 26 and know a lot more about the rotory ill stick with a bridgy. my mechanic tht helps me out with my rx-7s has 18 of them all done up for ice racing and time track. he has an old rx3 that he has all tuned up. that thing sounds amazing.
his first gen is exactly like the one i drive everyday, yeah even in the winter everyone thinks im crazy but its fun.
im excited to get my little truck running this spring with my 12a i am working on that truck is geared low as well so it will be awesome off the line

LeeR 01-01-2010 03:38 AM

damb a rx3.. lucky guy

ya man that little trucks going to be awsome you should do some old school 4 spoke drift wheels with stretched tires.


http://ll.speedhunters.com/u/f/eagam...s/nym/one7.jpg

the marine apprentice 01-01-2010 03:49 AM

yeah tht truck looks sweet. mine has 6 bolt all around and 4 wheel drums which i am going to get converted to disc breaks, i just emailed that website you gave me askin about rear ends and front hubs for my car.
i have 2 first gens im working on.

muck 01-01-2010 07:09 AM

Finally tracked down a couple pics of my Datsun when I brought it home a couple years ago.
Hoping to start on the body work in the next few months.

http://www.muiscontrols.com/ryan/510_1.jpg

http://www.muiscontrols.com/ryan/510_2.jpg

the marine apprentice 01-01-2010 10:08 AM

thats a sweet old datsun

riceboy 02-02-2010 04:04 PM

I have a 98 honda civic hatch with a turbo charge b18 making 202whp tuned at 9 psi

Mod list

Exterior:
Painted in 2006 BMW Imola red.
96 ITR 4x114.3 conversion
Wings West front lip (was going to replace with CTR replica)
CTR replica headlights

Interior:
Dual gauge pod with autometer boost and water temp gauge
Alpine head unit that place mp3/disc/ipod with Ipod integration cable
Alpine type-s 6.5" speakers in front. Stock in the back
Alpine type r 12 inch sub.
Compustar Pro-series alarm system with door actuators
red itr recaros (drivers and passenger)

Suspension/Brakes:
Koni Yellow adjustable shocks
Eibach Sportline Kit
ASR rear subframe brace with 32 mm sway bar. (Silver in colour)
Big four lug brake conversion. Front and Rear Hawk HPS pads installed.(itr brake conversion)

Wheels:
96 ITR wheels

Motor:
Bone stock B18B motor from JDMSource
Castrol Syn-tech 5w-50 oil.
1 step colder NGK v-power plugs
garret 50 trim t3/t4 (a/r .50 cold side and a/r .48 hot side stage 3 turbine)
3an feed line
10an return line with welded bung
Oil feed sandwich
Blaastperformance log manifold, downpipe 2.5 elbow to full 3 inch with external wastegate recirculating. DP and exhaust is joined by v-band clamp.
Custom Blaast 3 inch exhaust with torctite clamps (no gaskets) and stealth black muffler. (quiet for 3 inch)
Tial 38mm external Wastegate with 8psi spring
No-name intercooler (27.5x7x2.5) 2 inch inlet/outlet painted black with rad paint for stealth look.
Aluminum piping with newer edition HKS SSQV
Used only t-bolt clamps on charge piping.
Hondata s300 engine management
RC 550cc injectors w/ obd2 to obd1 injector conversion harness no splicing of wires.
255lph walbro fuel pump.
Megan racing aluminum 2 row radiator w/slim fan (s-blade)
Tuned by Anthony at Speedtech. Car made 202whp @ 9 psi on Toma's mustang dyno.

plan to finish everything up this year with ctr door panels and power windows (yes power windows in a civic hatch back lol), replace the koni yellow and eibach springs with d2 rs coilovers, add blox lca and blox camber kit, install ctr rear lip, and re-wrap the back ctr bench red to match the front recaros.hid conversion

then i'm finally done
lol

Reef_surfer 02-02-2010 04:23 PM

here is my baby at her prime
she has
24" Lexani custom painted wheels spare one on the back door
two tone paint
lowering kit
custom front grill with custom badges
HID headlights
JVC DVD Head unit
2x Kicker Solo Baric L7 Compitition subwoofers
2x 1000 watt kicker amps

http://i441.photobucket.com/albums/q...9242008465.jpg
http://i441.photobucket.com/albums/q...9242008475.jpg
http://i441.photobucket.com/albums/q...9242008469.jpg


All times are GMT. The time now is 08:24 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.