Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Buy/Sell/Trade (Aquatics hardware related only) (http://www.canreef.com/vbulletin/forumdisplay.php?f=31)
-   -   Urgently need 2" Gate Valve! (http://www.canreef.com/vbulletin/showthread.php?t=36748)

GreenSpottedPuffer 11-01-2007 04:59 AM

Quote:

Originally Posted by vancityfella (Post 279328)
I have a pvc ball valve brand new. I woould be interested in trade frags coral whatever pm if interested Kris

I need a Gate valve though, not ball valve. I also have no frags to trade anyways! Thanks though.

Delphinus 11-01-2007 05:11 AM

I once bought a single 10' length of 10" PVC from EMCO ... mind you this was in Calgary and it was a few years ago but anyhow, they did sell to me, I'm sure they'll deal with you. I felt like an idiot driving off with this one piece of honking big pipe strapped to my roof, but that's another story.

It won't work to get you a gate valve for tomorrow, but you could mail-order from here:
http://www.usplastic.com/catalog/var...ant%5Fid=19246

Anyhow best of luck!

GreenSpottedPuffer 11-01-2007 05:33 AM

Quote:

Originally Posted by Delphinus (Post 279334)
I once bought a single 10' length of 10" PVC from EMCO ... mind you this was in Calgary and it was a few years ago but anyhow, they did sell to me, I'm sure they'll deal with you. I felt like an idiot driving off with this one piece of honking big pipe strapped to my roof, but that's another story.

It won't work to get you a gate valve for tomorrow, but you could mail-order from here:
http://www.usplastic.com/catalog/var...ant%5Fid=19246

Anyhow best of luck!

Thanks!

untamed 11-01-2007 05:35 AM

If you are in that much of a hurry, use your knife valve and put a union above and below it. If the knife valve doesn't allow for accurate enough adjustment, you can replace it later with a better valve and you have time to find it.

Worst case is that the knife valve doesn't allow you to perfectly tune the Herbie. All that means is that you'll have a small trickle flowing down the emergency pipe. No big deal...just not perfectly silent.

GreenSpottedPuffer 11-01-2007 06:10 AM

Quote:

Originally Posted by untamed (Post 279341)
If you are in that much of a hurry, use your knife valve and put a union above and below it. If the knife valve doesn't allow for accurate enough adjustment, you can replace it later with a better valve and you have time to find it.

Worst case is that the knife valve doesn't allow you to perfectly tune the Herbie. All that means is that you'll have a small trickle flowing down the emergency pipe. No big deal...just not perfectly silent.

Well I shouldnt really be in such a big hurry but I have 6 QT tanks all over the apartment and a few friends staying with me a a week and a half. I really wanted to have everything done soon and I have a few days off now. I really do not want to rush things though. I will look for the Gate Valve tomorrow from either EMCO or this place called Pioneer Plumbing (they claim to have all kinds of rare plumbing). Hopefully I find one! I have to go to the same area to get glass cut for my overflow tomorrow anyways.

Delphinus 11-01-2007 06:14 AM

You know, everytime I go camping on the coast and drive out, I see this enormous irrigation supply store from Highway 1 as I get into Abbotsford. I'm sorry I don't recall the name but I think Marc (Superfudge) told me that's where he's gotten a whole bunch of really cool plumbing parts. It's a bit of a long shot but it might be worth looking into. PM Superfudge and ask him the name of the place .. sorry my tip is a bit "out there" but it just occured to me and I think it might be worth a shot...

GreenSpottedPuffer 11-01-2007 06:17 AM

Quote:

Originally Posted by Delphinus (Post 279355)
You know, everytime I go camping on the coast and drive out, I see this enormous irrigation supply store from Highway 1 as I get into Abbotsford. I'm sorry I don't recall the name but I think Marc (Superfudge) told me that's where he's gotten a whole bunch of really cool plumbing parts. It's a bit of a long shot but it might be worth looking into. PM Superfudge and ask him the name of the place .. sorry my tip is a bit "out there" but it just occured to me and I think it might be worth a shot...

Yeah thanks, I mean any tips would are great. I am going to call a few more places that are really close to me tomorrow morning and then go from there. I have no car right now, so going out to abbotsford is hard. I can get a ride though...Or rent a car if I were desperate enough!

Bryan 11-01-2007 07:06 AM

Have you checked out a place on venables in Vancouver, I beieve they are called Vancouver Irrigation. I would be surprised if they DIDN'T have it.

cole004 11-01-2007 07:52 AM

I picked mine up at Southern Drip in Chilliwack http://www.southerndrip.com/index.html A little pricey but a nice drive on a Saturday and you could stop at Hidden Reef on the way home.

mikeyd 11-01-2007 01:28 PM

EMCO does sell to the public, but i believe they may have a $25 min purchase for cash sales.


All times are GMT. The time now is 06:57 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.