Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   Chiller Died - What to do now? (http://www.canreef.com/vbulletin/showthread.php?t=26143)

Jaws 07-29-2006 12:06 AM

When do you want to place the order? ASAP?

Robw 07-29-2006 03:40 AM

I have a pacific coast chiller 1/10hp (should have gone bigger). The fan started to make noise and I discovered that a cheap white fan from walmart had the same type of motor. Shaft size, mounting holes etc were all the same. Don't have the model number of the fan but it was a two speed, small 6-8" clip on type fan. I used the high speed winding. It has been working fine for about 9 months now. Might be worth a look. Hope this helps.

Rob

StirCrazy 07-29-2006 04:51 PM

Quote:

Originally Posted by Robw
I have a pacific coast chiller 1/10hp (should have gone bigger). The fan started to make noise and I discovered that a cheap white fan from walmart had the same type of motor. Shaft size, mounting holes etc were all the same. Don't have the model number of the fan but it was a two speed, small 6-8" clip on type fan. I used the high speed winding. It has been working fine for about 9 months now. Might be worth a look. Hope this helps.

Rob

If you can remember what fan that was or if you see it next time you are in wallmart and can grab the part number that would be cool.

Steve

Robw 07-30-2006 06:53 AM

The one I ripped apart had the rotary switch on the back. I have a similar one that is a desktop type fan. Brand is "Super" model # 6dt, made in china.

Rob


All times are GMT. The time now is 11:10 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.