Well for now it is setup they way you see in the pics, No other option other than moving it farther out

if I have to, I have enough storage to drain the tank slide everything forward remove sump, it will be all good :)

o picked up Liverock from Delphinus last night
o Spent almost 3 hours tinkering, I like the look so far :)

Last night

http://www.hribnak.com/reef/var/resi...g?m=1437545566

This morning

http://www.hribnak.com/reef/var/resi...g?m=1437621795

http://www.hribnak.com/reef/var/resi...g?m=1437621890

http://www.hribnak.com/reef/var/resi...g?m=1437621889

http://www.hribnak.com/reef/var/resi...g?m=1437621890


I used soime of my old Rock that I had in storage for the lasty 7+ years as I knew I would be back someday :)

o Super Reef Octopus SSS-3000 skimmer added to the system
o 2 Tubes of pellets which have good nitrifing bacteria from Globaldesigns
tank (for the life if me forget what this is called)


These have been running in a rubbermain tub since the move.

Skimmer is skimming like mad already in my system.


next in order is tiding up the power cables (temperarily) Big plan is to move all power cables through the back wall to a new circuit , and a gang of outlets, no cables/power bars will be view of the main tank/sump

Also need to hook up the ATO system, and RODI unit :)


Jim

o Tunze ATO unit installed and tested
o 120 lbs Aragonite sand washed and added

Main Tank

http://www.hribnak.com/reef/var/resi...g?m=1437718196


Sump

http://www.hribnak.com/reef/var/resi...g?m=1437718024



Time to cycle , can not wait for the next phase!

moved most of the power connections into the basement on the wall opposite the tank. Have a few more to move, there will be minimal connections near the tank.

I added 2 13amp breakers and some power plugs there is one box that is messed up has I had to move it slightly and could not get it positioned the way I wanted but it will have to do as i had the wiring done and it was a cramped area, so it will stay as is LOL

http://www.hribnak.com/reef/var/resi...g?m=1437880703

Last night and this morning I tinkered with my RODI upgrade (had an aquasafe 100gpd RODI unit, got new filters in for it yesterday, could not get any RO produced, kept dinking around with the flow preventor (what a PITFA) finally got it synced this morning its at about a 3:1 ratio right now

TDS IN : 138-146
TDS OUT: O (without DI TDS is 1)

Now to figure out why the ASV does not stop waste from dumping down the drain, may have to get something else if this does not work


J

Move the Tunze ATO pump through the wall and into the Basement wher the RO container is. Testing and no issues pumping up bout 4 feet. Pump is only mid way into the RODI Storage container. Seems to work perfectly.


Hmm what is next, move a few more electrical from sump into the basement (if possible)


Things prepped

Pumps removed from storage for Saltwater storage container

1) Pump to get RO into SW Storage
2) Pump toi keep SW storage circulated
3) heated


Things to do:

o Saltwater storage container
o plumb from RODI container to SW container
o need a pump to get new SW to Sump


Future ideas

Plan to plumb a water change line
Plan to plumb for replacing new SW .