Psyire,

Do you use two solenoids in series just in case one fails?

you bet

Well i have to Say that is awsome customer service A BIG CHEER for Matthias
And Jason keep up the good work guys these controlers are awsome it is nice having so many options in one unit Looking forward to the new firm ware upgrade I can see I am going to have to put in some over time so I can buy some more options for it :) hehe

Doug

Matthias


The LED on mine goes out and the power stays on just so you know I have checked and rechecked the programing and found the same thing as Colin If I reset it to permanent and then go back to clock timer it works for a few days

Dont get me wrong Man I still love this thing looking forward to more stuff to plug into it :)

Doug

i picked up the 3 fan assembly tonight with controller. i have not hooked up the controller because i need a splitter for the outlet but the fans are running and the only way i can tell is put my hand in front. these are absolutely amazing as to how quiet they are. well worth the money. i'll post some pictures tomorrow

@jrm99:
your dimming curve setting - for what is it good for? Now you have 2 times switching on the lamp - that means 2x stress for the relay. I would recommend to alter it again to the first settings.
Quick solution for the moment until the digital powerbar is vailable: An easy way to reduce the inrush-current is to raise up the electric resistance - eg insert a long extension cord between powerbar and lamp. Should be no problem since the average current (after inrush) is not very high.

@MNSPS + Psyire:
You can connect two tunze cables to one port when you use a Y-adapter. If both pumps should be controlled separately the cables must be different: Tunz1 and Tunze2
Or you connect one cable to one port (L1L2) and the other cable to the other port(L3L4) - then both pumps are contollable separately anyway - doesn't matter if tunze1 or 2. But then both ports are occupied for just 2 pumps.
Any 1-10V-port has 2 channels
Tunze1 means: react on first of both channels of one port (L1 or L3)
Tunze2 means: react on secondof both channels of one port (L2 or L4)

MNSPS
I saw your thread on RC ,this is going to be an impresive set up ,good job my friend ,it looks like you have put a lot of time & research into this.
You better make some room for the T5 bulbs in your hood design .
we will have dimmable ballasts soon & profilux can dim the T5 for sunrise & sunset effect ,this feature is already built into your profilux.
http://reefcentral.com/forums/showth...hreadid=939634
great job

support@proline,

Thanks! There will be 4 -48" T5's in the hood along with two halides. I would definitely like to dim the T5's using the Profilux. What type of adapter cable is needed to do this? I also want to use the Profilux controller to control two dosing pumps to add a 2 part calcium additive. I have been looking at the Vario 1 Pro dosing pumps. Do you know what type of dosing pumps other Profilux user’s use? I'm also planning on using the mechanical float switch I received along with an optical float switch for my sump top off. Is there a diagram or picture somewhere that shows how the float switch mounting bracket should be assembled? I tried to assemble it myself and cannot figure it out.

Chris

Chris
I will not be in the office today ,I will post a picture of connection for you hopefully tomorrow .It is very easy to work with.
Dimmable ballasts ,will have a 1-10 v connection which is the part that gets connected to Profilux.
As for the Dosing Pump ,I am not sure what brand the guys in germany use ,I will ask Matthias.He also told me he has a dosing pump in the works ,I am not sure when they will be released though ,I am sure he will chime in.
Jason

Thanks Jason.:smile: