|
WARNING THIS POST IS ABOUT COOLING OF ELECTRONIC COMPONENTS...
aka... boring :D Quote:
I realize that they are less efficient but they are still better then MH IMO, Plus the cost per watt and/or per lumen is extremely high on the 3W with only slightly better efficiency. As for cooling water cooling is far superior to air cooling. The water that goes through the pipes will be colder then the air around the tank. If you want to look at cooling performance just look at high end computers... you will learn all the ways to cool a silicon chip. The chips work better and longer if they are kept at cooler temperatures (under 30 to 50 degrees) 1. Ambient air (Silent and uses no extra electricity, but requires a large heatsink and cannot cool very well... used on northbridge southbridge and on some older CPU's/GPU's) 2. Forced air (Often they are loud but they have worked hard on making quieter fans and more efficient designs works well for cooling and is fairly energy efficient, as computer components started to heat up the Ambient cooling was not good enough so they added fans to help move the heated air away and new air could absorb the heat. This is also a limited technology and it can never cool the heatsink colder then the surrounding air and usually about 10-20 degrees higher.) 3. Water cooling (Can be loud or quiet/silent depending on the type/location and type/location of pump. In small scales they are not very efficient but they can get things a lot cooler then forced air. Water cooling is generally setup with water going over a heatsink because water is such a good carrier of heat (in comparison to air) it can often get the heat sink within 5 degrees of the "radiator" you can have the radiator in several different styles generally they use the styles in example 1 or 2 but the radiator can be much larger than most heatsinks and can put in a colder location... like a basement, a fridge/freezer, outside, or just a colder room. 4. Peltier Cooler also known as Thermoelectric Cooling (Silent, Extremely inefficient and not commonly used in stationary applications... Used a lot in mobile electronics and things where space is limited.) 5. Phase Change (Depending on location and size/type can be quite loud. Best at cooling... can get the heatsink down to -40 degrees in ideal conditions. Expensive and not extremely popular for the cooling of electronics. Used in industrial applications, testing facility's and hardcore computer enthusiasts. 6. Liquid Nitrogen... (Silent... Expensive... Dangerous. Used in industrial applications, testing facility's and some hardcore computer enthusiasts with more money then brains) Using water is far better then trying to do forced air in my application there is too much heat to disperse in this size of an area. |
Quote:
Nope! |
Quote:
|
Quote:
http://www.reef2reef.com/forums/f60/...ene-29899.html with directions here http://www.reef2reef.com/forums/f30/...ver-29897.html That's not how I did it though. |
YAY! I had 9 people come over yesterday and help me to put my tank on the stand and move it into place :D we also had 2 beam lifters to get the tank to the proper height so we didn't kill anyone or brake anything (then I would have been killing people...) so the tank is in place and I spent about 2 hours putting the rock in place, the sand and I also put 10" of water in the tank to help me to get the sand into the crevices (it didn't work too well though cause now I can't see where the sand needs to go :surprise: oh well)
I would have taken some pictures but my batteries died... will post pics this afternoon though (I hope). PS thanks delo978 for coming and helping. Also thanks to all those who came to help and are following along. |
So I have some other pictures of the rock going in... after my brother and a bunch of others helped me move the tank he got out his camera and took some pictures as I was putting the rock in... anyways here is the tank ready for plumbing :D
The left side http://i737.photobucket.com/albums/x...e/LeftHalf.jpg The right side http://i737.photobucket.com/albums/x.../RightHalf.jpg FTS with the bottom tank in the mix as well. http://i737.photobucket.com/albums/x...TSwithsump.jpg |
|
looks great man. those angelfish are looking mighty hungry thou.......:lol:
|
Looking great! I love the rock work. How are you attaching the rock together?
|
:thumb::thumb::thumb:
|
| All times are GMT. The time now is 05:22 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.