Canreef Aquatics Bulletin Board - O.C.'s Pellet questions and answers!

Page 12 of 19

« First

Last »

Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Everything Pellets (http://www.canreef.com/vbulletin/forumdisplay.php?f=170)

- - O.C.'s Pellet questions and answers! (http://www.canreef.com/vbulletin/showthread.php?t=62637)

OceanicCorals-Ian-

04-27-2010 04:39 AM

Quote:

Originally Posted by kien (Post 514050)

I ran mine for 3 months out of sump without gluing and didn't have so much as a drop if water from it. :noidea:

Yikes! I would worry about the fittings separating.....!!!

kien	04-27-2010 04:41 AM

I wonder if some are made different because mine was really tight. I mean once I shoved it in there I needed pliers to get it out, I kid you not!

OceanicCorals-Ian-

04-27-2010 04:45 AM

Quote:

Originally Posted by kien (Post 514061)

I wonder if some are made different because mine was really tight. I mean once I shoved it in there I needed pliers to get it out, I kid you not!

Oh!! :shocked!: Not a chance for some of the ones I have put together including mine! You could tilt the Reactor and the fitting would fall to the floor....

burrows14

04-27-2010 04:47 AM

Quote:

Originally Posted by OceanicCorals-Ian- (Post 514057)

If you can't find anything I have some hose that will work if you don't mind driving into Langley to pick it up.....

Thanks Ian, I'll let you know if I cant find anything

kien	04-27-2010 04:49 AM

Quote:

Originally Posted by OceanicCorals-Ian- (Post 514062)

Oh!! :shocked!: Not a chance for some of the ones I have put together including mine! You could tilt the Reactor and the fitting would fall to the floor....

Oh geez! I must have gotten the 1 in a million with a manufacturing defect :lol:

OceanicCorals-Ian-

04-27-2010 04:54 AM

Quote:

Originally Posted by kien (Post 514064)

Oh geez! I must have gotten the 1 in a million with a manufacturing defect :lol:

:drinking:

Finley

04-27-2010 05:02 AM

Guys,
Once bio pellets are being run is there a need to still run my carbon and phos in my TLF cannisters?

OceanicCorals-Eugene-

04-27-2010 05:58 AM

Quote:

Originally Posted by Finley (Post 514072)

Guys,
Once bio pellets are being run is there a need to still run my carbon and phos in my TLF cannisters?

Its always good to have carbon running as the bio pellets and carbon remove different things. As for phosphate removers, its not necessary to run them, and i would actually recommend stopping the phos remover as it limits the PO4 levels that the pellets need in order to work properly.

Cameron

05-02-2010 06:34 AM

Here is my TLF150 Phosban reactor, with MJ1200, and the New NP Pellets:

http://www.youtube.com/watch?v=MbuPRkYg-FA

UPDATED

OceanicCorals-Ian-

05-02-2010 05:25 PM

Quote:

Originally Posted by Cameron (Post 515717)

Here is my TLF150 Phosban reactor, with MJ1200, and the New NP Pellets:

http://www.youtube.com/watch?v=j9TQKnxL2ws

Can't see your video for some reason, it says private video...??

All times are GMT. The time now is 03:02 AM.

Page 12 of 19

« First

Last »

Show 40 post(s) from this thread on one page